NTT docomo FOMA D703i User Manual page 280

･
After recording, the file name and display name can be
changed. ☛P270
Recording time of sound
The sound recording time varies depending on the
settings of quality and size restrictions. The
maximum time for a single recording and the total
time of recordings that can be saved are as shown
below:
･
Quality and size restrictions can be set in
Recording Setting. ☛P150
Max.
recording Quality
time
For one 8 min.
STD
operation
5 min.
HQ
Total STD 194 min.
HQ 127 min.
Reading the recording screen
a
b
e f
a
Setting guide
Use & to change settings for recording. ☛P279
b
Type
Indicates to record sound.
c Counter
<During standby for recording>
Indicates the approximate maximum recording
time of sounds that can be saved with the current
settings.
<During recording/pause>
Indicates the approximate elapsed/remaining time
(duration until the recording stops).
d
Indicator
<During standby for recording>
Indicates the usage rate of the storage area.
<During recording/pause>
Indicates the rate of the recorded sound size to
the file size set in size restrictions.
Quality ☛P279
e
Size restriction ☛P279
f
278 Displaying/Editing/Managing Data
File size restrictions
Msg attach: Msg attach:
Small Large
32 min.
21 min.
194 min.
127 min.
c
d
Recording the sound
･
Record the sound in as quiet a place as possible
with no or little noise.
･
Even when silent is set for the ring alert volume,
Silent Mode or Public mode (Driving mode) is
active and so on, the recording confirmation
sound (shutter sound) is heard. Also, the volume
of the shutter sound cannot be changed.
･
While you are using Sound Recorder, the keys
and the camera indicator light or flash. You
cannot set them not to light or flash. Also you
cannot change the lighting pattern.
Status Key light
During start time Lights.
On the recording
screen
During recording Flashes.
During pause Lights.
m64
1
Sound Recorder is activated.
o or C
2
Recording is started after the shutter sound is
heard. appears at the bottom of the screen.
･
The sound is recorded from the microphone.
Press o to pause recording.
･
. Recording is resumed by pressing o or
C.
p or C
3
The shutter sound is heard and recording is
finished. A confirmation screen for the recorded
sound is displayed.
･
If the file size exceeds the limit, recording ends
automatically.
Press p to end the recording during pause.
･
･
For auto-saving without displaying a
confirmation screen ☛P151
4 Confirm the recorded sound
･
To save the sound immediately: Go to Step 5
To record again without saving: c
･
To replay the sound: p
･
For auto-playing ☛P151
･
■
Sending mail with the recorded sound
attached: a
A confirmation screen is displayed asking
whether to save the recorded sound. Select
Yes to save the recorded sound, and the mail
composition screen is displayed.
Camera indicator
−
Lights.
−
Flashes.
Lights.
switches to