NTT docomo FOMA D703i User Manual page 312

Setting to notify the limit of call cost
Set the maximum limit of call cost, and when the
total call cost exceeds the set amount, it is
notified with an alarm or icon.
･
The amount shown in Call Cost Limit is only an
estimate and should not be regarded as the
actual amount for billing.
Default Alert: OFF
m86622
1
2
Enter the terminal security code
and set each item
Alert：
Set whether to notify when the total call cost
exceeds the set amount.
Limit：
Set the maximum amount of call cost (10 to
100,000 yen, 10 yen unit).
Alert method：
Select the alarm with icon, or the icon only.
Alert sound：
Select an alarm sound from the melody list
when Sound + icon display is selected in Alert
method.
･
Playing and checking a melody when
selecting ☛P102
Alert time：
Specify how many seconds alarm sound
should ring (1 to 60 sec.). Available when
Sound + icon display is selected in Alert
method.
INFORMATION
If the call cost exceeds the maximum limit while talking or
●
during communication,
display.
When Sound + icon display is set for Alert method, the
●
alarm sounds and message informing that the call cost
exceeds the maximum limit is displayed on the standby
display after a call/communication. In the general silent
mode, a message appears but the alarm does not sound.
In the personalized silent mode, the alarm sounds
according to the ring alert volume set for Customize
Silent Mode. If the call cost exceeds the limit during a call
or communication at 00 o'clock of the first day of the
month when Reset Call Cost is set to ON, neither the
alarm sounds nor the message appears.
The alarm sounds at the volume set for the call alert
●
volume.
If any key is pressed or other function is started while an
●
alarm is sounding, the alarm sound stops.
310 Other Convenient Functions
Call Cost Limit
z
Select
z Press p
is displayed at the top of the
Even if the UIM is replaced after Call Cost Limit is set to
●
ON, the setting is stored.
Removing the icon of alert
m86623
1
the terminal security code
Using Calculator
You can perform addition, subtraction,
multiplication and division (
FOMA terminal.
･
Up to 8 digits can be entered.
･
You can use Calculator from the entry fields for
schedules and notes, and paste the result of a
calculation into the entry field of the original
screen. ☛P334
m74
1
2
Make a calculation
To delete the last digit entered: a
･
To delete all: c
･
To enter a decimal point: (
･
･
To switch the displayed value between the
positive and negative: #
Press o
3
The calculation result is displayed.
Pressing c deletes the calculation result.
･
Copying the calculation result: m1
■
To paste the copied value: m2
･
･
Only one number can be saved. The copied
number is saved until copying a new
number or FOMA terminal is turned off.
･
A copied number can be pasted in the entry
field of notes, the mail composition screen,
etc. any number of times. You can also copy
up to the first 8 one-byte digits of a number
in the entry field of notes, the mail
composition screen, etc. and paste them on
the calculator screen.
Hide Call Cost Icon
z
Enter
z
Select Yes
Calculator
＋ , − , × , ÷ ) on your
Calculate using the
dial keys (0 to
9) and O (＋, −,
×, ÷).