NTT docomo FOMA D703i User Manual page 279

Using the infrared remote control
function
FOMA terminal can be used as an infrared
remote controller by downloading the i-
infrared remote control.
･
Download the i- ppli suited for the individual
α
device.
･
If the preset i- ppli "Gガイド番組表リモコン"
α
(G-GUIDE TV Remote Controller) is activated,
FOMA terminal can be used as an infrared
remote controller for TV, etc. ☛P237
･
This function is unavailable while Self Mode is on
or infrared communication is executed.
･
Communication may be influenced by the model
of the supported device used and ambient
luminance.
･
Some equipment cannot be operated even if it is
compatible with infrared remote control.
Remote control operation
Perform remote control operation with the infrared
data port of FOMA terminal pointed at the infrared
receiver of the supported device used (operating
procedure differs depending on i-
remote control is 15 degrees from the center and the
distance is about 4 m at the maximum. However, the
angle and distance allowed for the operation differs
depending on the type of devices to operate and the
level of brightness in the environment.
Infrared
receiver
15°
Infrared data
port
ppli for
α
ppli). Angle for
α
Approx. 4 m
15°
Setting operations for data exchange
Set operations for data exchange by infrared
communication and USB connection.
Default End alert: OFF Auto authentication: OFF
Ph. book image sending: ON
m624
1
2 Select each item to set
End alert：
Specifies whether to sound a
communication end tone at the end of
communication.
Auto authentication：
Specifies whether to automatically exchange
authentication codes with the other party
while connecting to USB.
･
To set ON, enter the terminal security code
and the 4 to 8-digit authentication codes
for a mobile phone terminal (FOMA
terminal)) and for PC (the other party), and
then press p.
Ph. book image sending：
Specifies whether to send images saved in
the phonebook along with the all phonebook
data when sending all data items.
Making full use of Sound Recorder
Recording sound with Sound Recorder
Recorded sound can be played on your FOMA
terminal. It can also be sent as an i-mode mail
attachment or via infrared communication.
･
Recorded sound is saved as video/i-motion
without image.
File name/File format
The date and time recorded is attached to the file
name, display name and the title of the sound file
automatically.
(Example) In case of 12:34:56 on May 20, 2007.
→ 20070520123456
The file format is as follows:
Item
File format
Encoding method
Extension
Displaying/Editing/Managing Data
Data Exchange Setting
z Press p
Sound Recorder
Contents
MP4 (MobileMP4)
AMR
3GP
277
Next