NTT docomo FOMA D703i User Manual page 58

Setting for international calls
You can set whether to make an international call by replacing "+" which was entered at the beginning of a
phone number with the international access code set in this setting.
Default Intn'l prefix: ON (Name: World Call, Intn'l prefix No.: 009130010)
Setting the auto-switch function
m881
1
z
2
Set each item
Intn'l prefix ：Set whether to automatically replace "+" with the international access code.
･
When ON is selected, select an international access code.
Registering the international access code (International prefix)
･
Up to 3 international access codes can be registered.
m882
1
2
Select <Not recorded>
■ Setting the international access code which is to replace "+": Highlight an item
is displayed indicating the set code.
■
Deleting: Highlight an item
3
Select Name field
4
Select Intn'l prefix No. field
Using "+" to make an international call
When you enter "+" at the beginning of a phone number for dialing, a confirmation screen appears asking
whether to replace "+" with the international access code according to Int'l Call Assist.
･
If you make a call by entering "+" before the country code of Japan "81", the international access code does
replace it.
･
This operation is valid when Intn'l prefix of Int'l Call Assist is set to ON.
0 (for over a second)
1
z n
number
Hold down 0 for over a second to enter "+".
･
･
When the area code begins with "0", dial without "0" (when calling to a general subscriber phone and
other phones in Italy, you need to dial "0").
2
Select Yes
･
Select No, use original to dial the phone number without replacing "+".
56 Calls/Videophone Calls
Press p
z m3 z
z
Enter a name (up to 16 one-byte or 8 two-byte characters)
z
Enter a code (up to 10 digits)
z
Enter the country code
Select Yes
z
area code (city code)
Int'l Call Assist
z p
z Press p
z
phone