・
If you set to Pattern C, the terminal vibrates as follows: about 0.25 second vibration → about 0.25 second
pause (repeated)
・
If you set to Sync melody, the terminal vibrates along with the melody set as ring alert, etc. Note that it may
not vibrate depending on melodies. In addition, vibration may not synchronize with the theme.
・
When Call vibrate alert is set,
standby display.
Priority of vibrator
When the vibrator is set in multiple functions, the vibrator operates by priority given below:
a Alert by Contact of the FOMA terminal phonebook
b Alert/Image by Group of the FOMA terminal phonebook
c Vibrator Setting
INFORMATION
The vibrator does not operate when another call is received during a call.
●
Even when OFF is set, the vibrator may be activated while some Flash movies are being played.
●
Even if Sync melody is highlighted on the selection screen for the pattern, the vibrator does not operate.
●
The settings of this function are also reflected to the following settings:
●
・
Call Alert, Videophone Alert ☛P63
Message Alert ☛P175
・
Setting the alert sound for charging
Set whether to sound the alert sound for the start and completion of charging.
Default ON
m8115
1
INFORMATION
Even when ON is set, the charge alert sound is not played in the following cases:
●
・
In Silent Mode
・
During a videophone call
・
During packet communication
Setting the alarm announcing that the call is about to be cut off
When signal conditions for voice calls deteriorate, an alarm sounds just before the call is cut off on the
way.
・
If signal conditions deteriorate suddenly, the call may be cut off before the alarm sounds.
Default High alarm
m81163
1
Press 1 or 2
2
To set not to sound: 3
・
106
Sounds/Displays/Lights Settings
(when the call alert volume is set to silent,
・
Mail Alert ☛P220
・
Vibrate Effect for i-
z
Press 1 or 2
・
In Public mode (Driving mode)
・
During 64K data communication
) is indicated on the
・
Chat Mail Alert ☛P223
ppli ☛P235
α
・
During a voice call
・
During i-mode communication
Charge Alert
Quality Alarm