NTT docomo FOMA D703i User Manual page 226

Table of Contents

Advertisement

Default Alert setting: Customize
Ring alert: Melody/メール・メロディB (Mail,
melody B) Light alert: ON/Rotation
Vibrate alert: OFF
Ring time (sec): 10
a92
1
2
Select each item to set
Alert setting :
Specifies whether to set the operations for
incoming chat mail or follow the settings for
Mail Alert.
When Customize is set, the following items
can be set.
Ring alert :
When Melody, Movie ringtone or Music is
selected, set the ring alert.
Setting music data ☛P102
Playing and checking a melody or video/
i-motion file ☛P102
Light alert :
Sets whether to light the keys and the
lighting pattern.
Vibrate alert :
Sets the vibration for incoming chat mails.
Ring time (sec) :
Sets the sound duration of ring alert (1 to 30
seconds).
INFORMATION
When more than one mail are received at the same time,
this function setting applies only when the last received
mail is chat mail.
Even if you set Sync melody for Light alert or Vibrate alert,
operation of lighting or vibrator may not occur depending
on the melody.
Using SMS (Short Message)
Composing and sending SMS
The maximum number of items that can be saved
☛P381
If you use one-byte katakana, the receiver may not
be able to display them correctly.
International SMS can be sent and received to/
from the parties that use overseas carriers other
than DoCoMo. Please visit the DoCoMo website
for the countries where the service is provided
and available overseas carriers.
Reading the received/sent/unsent SMS list/view
screen ☛P206
224
Mail
z
Press p
Menu 171
Compose SMS
Example
Composing and sending a SMS
message by entering address directly
a71
z
1
2
Select Direct input
(the other party's phone number)
To send to a party that uses an overseas
carrier other than DoCoMo, enter "+" (by
holding down 0 for over a second) and the
country code plus the party's mobile phone
number. Omit the first 0 of the phone number.
You can also send by entering "010" and the
country code plus the party's mobile phone
number (add "010" when replying to a received
SMS message from overseas).
You can enter up to 26 characters in the
field. However, up to 20 characters (21
characters if "+" is contained) can be sent as
address.
Searching the phonebook: Select View
z
Select a party
phonebook
When multiple phone numbers are
registered, select a phone number.
z
3
Select
Enter the message
When the font type is set to Japanese in SMS
Setting, up to 70 one-byte or two-byte
characters can be entered. A space is also
counted as a character in the message.
When the font type is set to English in SMS
Setting, up to 160 one-byte characters can be
entered. Alphanumerics and symbols (except
for `。「」、・゙ and ゚) can be sent. An one-byte
space is counted as a character in the
message.
Line feeds can be inserted in the message.
Press # to enter a line feed in 5-touch Input
Method (except in the one-byte and two-byte
numeric modes). A line feed is counted as a
character in the message. However, it is
replaced by a space on the receiver's terminal.
Inserting a signature: m45
Signature must be registered beforehand.
Select
field
z
Enter the address

Advertisement

Table of Contents
loading

Table of Contents