Using The Uim (Foma Card) - NTT docomo FOMA D703i User Manual

Using the UIM (FOMA card)

The UIM (FOMA card) is a card in which your phone number and other information are recorded.
Insert the UIM into FOMA terminal to use it.
･
For details on handling the UIM, refer to the UIM manual.
Inserting/removing the UIM
Use your FOMA terminal with the UIM inserted. If the UIM is not inserted in your FOMA terminal, first insert it.
･
Turn the power off before inserting or removing the UIM.
･
Insert or remove the UIM by holding FOMA terminal with both hands.
Inserting the card
Removing the card
aPull out the tray.
･ The operations are the same as a to b in
"Inserting the card".
bRemove the UIM by sliding it out.
INFORMATION
Insert or remove the UIM carefully as forcing it may damage the card.
●
Carefully handle the removed UIM so that it does not become lost.
●
When attaching the battery pack, make sure that the UIM tray is in place. If not, you cannot attach the battery pack.
●
Forcibly attaching the battery pack may damage the UIM or the tray.
When pushing the UIM tray in, make sure that the UIM is properly placed in the tray. Forcibly pushing the tray into
●
FOMA terminal may cause an operation error.
32 Before Using D703i
Tray is pulled out until it stops.
Tray
Cut corner
Cut corner
IC
UIM
aRemove the back cover and then
the battery pack. ☛P35
bPull out the tray.
Place your finger on the tray and
slide it out until the tray stops.
cWith the IC side of the card
facing up, slide the UIM on the
tray to match the cut corner of
the UIM to the cut corner of the
tray.
dPush the tray in until it stops.
eReattach the battery pack and
then the back cover. ☛P35
When the UIM tray is removed
Insert and push the tray
straight in.
● Remove the UIM
before replacing the
tray.