2
Place the cursor at the start point
To select the whole sentence: mo
・
・
To select whole sentence on the entry screen
for mail message: a
3
Place the cursor at the end point
o
The characters in the selected range are copied.
・
To select from the start point to the beginning:
mo
To select from the start point to the end: po
・
Pasting characters
・
When the pasted phrase exceeds the number of
characters permitted in the edited sentence, a
message appears indicating that all characters will
not be able to be pasted. When you select Yes, the
allowable number of characters is pasted.
1
Place the cursor at the location to paste on
the character entry screen
m3
・
On the entry screen for mail message, press
m and select Paste.
INFORMATION
When the type of the copied/cut characters does not
●
match with the character type used in the destination
field, pasting is disabled. For example, hiragana or kanji
cannot be pasted into the mail address field.
When a character string containing a line feed is pasted
●
into an entry screen that cannot contain any line feeds,
the line feed is replaced by a blank.
Entering characters using codes
Characters, numbers and symbols on the Kuten
code list are entered using 4-digit code.
・
For codes, see Kuten Code List in PDF format in
the supplied CD-ROM.
Example
Entering " 携 " (code number 2340)
m on the character entry screen
1
Select Phrase/Kuten/Quote
2
Enter the 4-digit code
(2340 in this case)
336
Character Entry
z
o
Registering frequently used words
Using registered readings makes it easy to
z
Press
convert characters.
1
2
3
z
Press
4
5
Registering during character entry
You can select entered characters and register them
as a word.
KUTEN Code Input
1
2
z
z
2
3
・
Up to 200 words can be saved.
m8621
Select <New word>
・
To edit the registered word: Select a word to edit
・
To check the registered word: Highlight a word
p
You can edit it by pressing o.
■
Deleting words:
a Highlight a word to delete
b Select Delete
・
To delete all: Select Delete all
z
Select Word field
register (up to 24 one-byte or 12 two-byte
characters)
Select Reading field
(up to 8 two-byte characters)
・
You can enter only hiragana.
Press p
・
A confirmation screen appears when editing
registered words. Select Overwrite to replace
the original word. To register a new word,
keeping original word intact, select New.
m on the character entry screen
Select Save word/phrase
Place the cursor at the start point
To select the whole sentence: mo
・
Step 4
・
To select whole sentence on the entry screen
for mail message: a
Place the cursor at the end point
The characters in the selected range is displayed
in the Word field.
・
To select from the start point to the beginning:
mo
Save Word
z
z
m
Enter the word to
z
Enter the reading
z
z
1
z
o
z
Go to
z
Go to Step 4
z
o