NTT docomo FOMA D703i User Manual page 334

p
p
d
/
o
4
The characters are fixed.
･
When Input prediction of Input Method Setting
閉じる
is ON, select
■ Inserting characters:
Move the cursor to the insertion point by O
and enter the character. The entered
character is inserted at the cursor position.
■
Deleting characters:
･
When the cursor is inside an entered
character string
(Example:ドコモ
Press c to delete a character at the
･
cursor position.
Press c for over a second to delete the
･
character at the cursor position and all
following characters.
･
When the cursor is at the end of an entered
character string
(Example:ドコモ太郎 )
Press c to delete the character at the
･
left of the cursor position.
Press c for over a second to delete all
･
entered characters.
■
Entering line feed:
Press #.
･
Some entry fields may not permit a line feed.
Press o
5
Character entry is exited.
INFORMATION
In the following input modes, when the specified time
●
elapses without pressing any key in inputting, the
automatic cursor function will automatically move the
cursor to the right. You can change the time setting for
move and disable the automatic cursor function. ☛P338
･
One-byte/two-byte alphabets
･
Hiragana/kanji
･
One-byte/two-byte katakana
You can perform the following operations after the
●
automatic cursor function has moved the cursor to the
right.
( : Add voiced/semi-voiced sound
･
t : Switch between upper/lower cases
･
a : Return to the previous character
･
332 Character Entry
(Close).
太 郎)
Block conversion of multiple clauses
･
Up to 24 two-byte characters can be converted.
Example
Entering " 動物園に行きましょう。 "
z
1
Enter characters
Fixing all characters: m
■
Fixing converted portion: o
■
Changing conversion range: &
■
When pressing l
Entering characters using input prediction
function
The input prediction function is to display a list of
predictive conversion options that match the initial
part of the reading when characters are entered.
This function automatically registers previously
entered characters as predictive dictionary data; you
can easily enter the same characters next time,
quickly by entering only the first part.
･
The following words and character strings are
displayed as options:
･
Standard words
･
Words entered by kana/kanji conversion
･
Character string converted and entered by
Downloaded Dictionary
･
Character strings registered by Save Word
･
Only the hiragana/kanji mode can be used in
predictive conversion. However, predictive
conversion is not available during in-line entry
and when entering with Slot Input Method.
1
Enter characters
A list of predictive conversion options is displayed.
p
･
The more characters
are entered, the less the
number of predictive
conversion options are
available.