NTT docomo FOMA D703i User Manual page 224

Press p
8
Composing and sending chat mail
･
Chat mail is sent to all the registered members by
default. You can also select members when
sending, but the setting returns to default when
you quit chat mail or change chat member
information.
･
The sent chat mail is saved in the Outbox folder of
Outbox. However, when the sent mail matches
the criteria specified in Sort Criteria, it is saved in
the specified folder.
a3
1
･
When a confirmation screen appears asking
whether to add members, select Yes and
register.
2 Select the text entry field
message (up to 500 one-byte or 250 two-
byte characters)
■
Copying and pasting text from chat mail
log:
a Highlight a chat mail
Specify the range
Specifying the range ☛P335
･
b Select the text entry field
paste location
Selecting members to send mail: m3
■
z
Select addresses
Press p
3
･
When the chat mail is sent correctly, the sent
chat mail is displayed on the chat mail screen.
■
Replying to all the broadcast addresses of
received mail: m22
INFORMATION
Chat mail can be displayed on the chat mail screen by
●
the following operations:
･
In the received/sent mail list, highlight a chat mail,
press m and select Display → Start chat mail.
On the received/sent mail view screen, press m and
･
select Display → Start chat mail.
If chat mail fails to be sent or is unsent when quitting chat
●
mail, it is saved in the Unsent messages folder of Unsent
messages. In this folder, only one chat mail can be saved.
If sending of another chat mail fails, the chat mail saved
in the Unsent messages folder is overwritten. In addition,
the chat mail saved in the Unsent messages folder is
displayed in the text entry field next time chat mail is
started. To resend unsent chat mail, start operation from
the chat mail screen.
222 Mail
Menu 13
z
Enter a
z m6 z
z
Specify the
z m3
z p
Receiving chat mail
When chat mail has been started
When mail with the subject containing "チャットメー
ル" in one-byte or two-byte characters is received
from a registered chat member, a message indicating
that the log is updated appears and the received chat
mail is added on the chat mail screen.
･
When chat mail has been activated, the ring alert
or vibrator does not start even if a chat mail is
received. The keys for incoming mails do not
light/flash, either.
･
When chat mail is received from a sender not
registered as a chat member, follow the procedure
in "When chat mail has not been started" below to
display the mail on the chat mail screen.
When chat mail has not been started
Chat mail is saved in the Inbox folder of Inbox as
i-mode Mail. However, when received chat mail
matches the criteria set in Sort Criteria, it is saved in
the specified folder.
1
Highlight the mail to display as chat mail in
the received mail list
m75
･
On the received mail view screen, press
m33.
･
If the sender address of the selected mail is not
registered as a chat member, a confirmation
screen appears asking whether to register it.
Select Yes to register. ☛P221
･
Deco-mail or HTML mail received from PCs
cannot be displayed on the chat mail screen.
Receiving chat mail stored in the i-mode Center
Press m1 on the chat mail screen
1
If there is chat mail stored in the i-mode Center,
a message indicating that the log is updated
appears and the received chat mail is added on
the chat mail screen.
･
When blinks, the log cannot be updated.
･
When chat mail is received using Check i-mode
Message, i-mode Mail is also received at the
same time.
Receive Chat Mail
z
Press