NTT docomo FOMA D703i User Manual page 317

INFORMATION
When a videophone call is answered by Auto Answer,
●
the substitute image set in Videophone Image Setting is
sent and a videophone call is automatically started.
When this function and Answer Machine, Voice Mail
●
Service or Call Forwarding Service are set
simultaneously, the set ringing time determines which
function will be used.
The same time period cannot be set for both the delayed
●
time of Auto Answer and the response time of Answer
Machine.
When the value set for the delayed time is within the time set
●
by Mute Ring Time Setting, Auto Answer does not answer a
call coming from a party not saved in the phonebook.
Hearing the ring alert only through the earphone
When connecting the Flat-plug Earphone/
Microphone with Switch, you can set to hear the ring
alert only through the earphone of the headset.
Default Headset only
m8441
1
Press 2
2
･
To hear the ring alert both through the
earphone and the speaker: 1
INFORMATION
Even when you set to Headset only, you will also hear the
●
ring tone through the speaker when 20 seconds pass
without answering a call.
Reducing the start-up time after
power-on
Default ON
m865
1
Press 1
2
To cancel: 2
･
INFORMATION
Even when you set to ON, it takes the normal time to
●
start up in the following cases:
･
When the remaining battery level is 2 or lower
･
When the battery pack is replaced
･
When 24 hours pass after the power was turned off
It may also take the normal time to start up after you
turn the power off with any other screen than the
standby display or while
after power-on.
Alert Preference
Quick Start-up
is being displayed just
Checking current settings of functions
･
During PIM Lock, the specific setting of the item
being locked is displayed as "---".
m8664
1
Current setting for the mode is displayed.
O to confirm the settings
2
Press & to switch between pages.
･
Resetting functions
This resets functions to their default settings.
･
For the functions to be returned to the default
settings by resetting, see "Menu list". The
following functions and data, though not
mentioned in "Menu list", are also reset to the
default settings:
･
When Preferences is selected:
Silent Mode, Public mode (Driving mode), Call
cost icon, Input history of face marks, Input
history of symbols and pictograms
･
When Full Brower Settings is selected:
Cookie information, Pointer mode, View
position setting, Search setting
･
When Predict dict. data is selected:
Data recorded using the input prediction
function
m8666
1
2 Enter the terminal security code
the item
p z
3 Select Yes
INFORMATION
If you reset functions to their default settings, both ON
●
mode/OFF mode will be reset.
Other Convenient Functions
Confirm Settings
Reset
z
Select
315
Next