NTT docomo FOMA D703i User Manual page 367

●An incoming voice call cannot be responded
with the Any Key Answer function.
Is Any Key Answer set to OFF? ☛P61
●During a voice call, the other party's voice is
hard to listen or too loud.
Has the earpiece volume setting been changed? Adjust it
appropriately. ☛P62
●When there is an incoming call, a name
recorded in the phonebook is not displayed or
the ring alert registered in the phonebook is
not generated.
Is the phone number notified by the other party? ☛P60
･
･
Does the phone number of the other party match the
phone number registered in the phonebook?
･
Is more than one phone number registered in the same
FOMA terminal phonebook or is the same phone
number registered in the FOMA terminal phonebook
and the UIM phonebook? ☛P80
･ Is Privacy Mode activated? ☛P134
●When there is an incoming call, a ring alert
not set sounds.
･
The ring alert set in multiple functions sounds depending
on the priority levels. ☛P103
Is Privacy Mode activated? ☛P134
･
●When there is an incoming call, an image not
set appears.
･
When video/i-motion containing sound and image is set
as ring alert for Call Alert, the set video/i-motion is used
as the image.
･
When call images are set in multiple functions, the
image appears depending on the priority levels ☛P114
･ Is Privacy Mode activated? ☛P134
●When there is an incoming call, the keys light/
flash in a lighting pattern not set.
･
If a lighting pattern is set for multiple functions, the keys
light/flash depending on the priority levels. ☛P122
･ Is Privacy Mode activated? ☛P134
Settings and operations
●Key icon is displayed instead of menu icon
and icon cannot be selected.
In case some functions cannot be activated because of
various lock functions or the UIM not inserted, their icons
change to and cannot be selected.
●The keypad sound is not generated.
･ Is Keypad Sound set to OFF? ☛P104
･ Have you set Silent Mode? ☛P107
●A message Insert UIM. is displayed when FOMA
terminal is powered on.
The UIM may not be properly attached or may be
damaged. Check to see if the UIM is properly attached.
☛P32
●All locked. appears on the display.
All Lock is set. Cancel All Lock. ☛P130
●Omakase Lock active. is displayed and cannot
operate the terminal.
Omakase Lock (Remote Lock) is set. ☛P131
●Nothing is indicated on the display.
･
Is Normal use of Display light time in Display Light
Setting set to other than Always? Screen display
disappears after about 90 seconds have elapsed
without any operation. ☛P116
Display reappears by any key operation.
･
Have you set Key Lock? Display on the screen
disappears while Key Lock is on. ☛P136
●The display is indicated by a dim color and
hard to be viewed.
Is Only View set to ON? ☛P218
●Pressing keys has no effect.
The keys cannot be used because Key Lock is set.
Cancel Key Lock. ☛P136
●The day of the week appears in Japanese.
･ Is Day for Clock Display Format set to Japanese? ☛P123
･
Is Select Language set to
●The display is dim.
Is Brightness in Display Light Setting set to Low? ☛P116
●The lighting for the display and dial keys does
not go on.
･
Is Normal use of Display light time in Display Light
Setting set to 0 sec? ☛P116
･ Have you set Key Lock? ☛P136
●When Auto Power ON is set, FOMA terminal
cannot be turned on at the specified time.
If the power is turned off in a manner other than the
power-off operation or Auto Power OFF function (battery
pack came off, for example), this function is not activated.
●Even if Alarm Clock or the schedule is set, the
alarm does not operate at the specified date
and time when the power is turned off.
･
If the power is turned off in a manner other than the
power-off operation or Auto Power OFF function
(battery pack came off, for example), this function is not
activated.
Set Alarm Auto Power ON to ON. ☛P297
･
●Call cost has not been charged.
The total cost for the UIM may exceed the limit (about
16,770,000 yen).
You can reset to 0 yen. ☛P309
Mail and data
●Still images and video taken with the camera
are blurred.
When shooting an object nearby, use macro mode and
switch to normal mode when shooting an object at a
distance. ☛P152
Appendix/Data Interchange/Troubleshooting
(Japanese)? ☛P40
日本語
365
Next