NTT docomo FOMA D703i User Manual page 66

INFORMATION
Setting Created animation for the incoming image displays the first frame.
●
When the video/i-motion with sound only (i-motion without image such as singer's vocals) or music data is set for Ring
●
alert, if Show image is reset to the video/i-motion with image only or Flash movie, the ring alert is reset to the default
setting. The melody can be changed afterward.
Some video/i-motion may not be set for the incoming image. Also, the video/i-motion with sound cannot be set.
●
Setting the priority screen for incoming calls during a call or packet communication
Set the priority of the screen to be displayed when you receive a packet communication through a
connected PC during a voice call or you receive a voice call during i-mode.
･
When there is incoming i-mode packet communication during a voice call, the voice call talking screen
appears by priority regardless of this setting.
･
The screen change caused by this function does not interrupt the call or packet communication.
Default No Set Up
m8461
1
Press any of 1 to 3
2
No Set Up：Displays the screen for the latest incoming call/communication without setting the priority.
Voice call ：Displays the voice call talking screen by priority.
：Displays the packet communication screen during a voice call, and the i-mode communication
Packet
screen during i-mode.
Press b to display the Switch Task menu then answer an incoming call.
･
When you can or could not answer a call/videophone call
Putting incoming calls on hold when you cannot answer right away
･
Callers are charged for the time spent on hold.
f while receiving a call
1
Incoming voice
call on hold
Press n when you are ready to answer the call
2
t
or n for a videophone call and the substitute image (☛P76) is sent to the other party.
･
Press
If f is pressed or the other party hangs up during Response and Hold, the call is ended.
･
64 Calls/Videophone Calls
Incoming videophone
call on hold
The incoming call is put on hold (Response and
Hold). The other party hears the response hold
guidance.
For videophone calls, the response hold image
appears on your and the other party's terminals.
Priority Comm Mode
Response and Hold