NTT docomo FOMA D703i User Manual page 138

Preventing key errors
Disables the key operations and prevent wrong operations while you carry the terminal around by
putting it into a bag, etc.
･
Key Lock can be set/canceled even when the screen other than the standby display is displayed. However,
the setting is unavailable until the standby display appears after turning on the power.
Default not set
1
Hold down the keylock switch for over a second
Key Lock is set, and the standby display disappears.
･
The screen is still displayed and
the following cases:
・
When the shooting/recording screen of the camera is displayed or during the
shooting.
・
When Normal use of Display light time is set to Always in Display Light Setting.
・
When charging the battery in case AC adapter connected of Display light time of Display Light Setting is
set to Always on.
・
When executing functions in which Display light time of Display Light Setting is set to Always on.
･
During a call, Key Lock is set in the state of temporary release and
part of the display. When a call is ended, Key Lock is set.
■ Canceling: Hold down the keylock switch for over a second
Key Lock is canceled, and the display lights.
INFORMATION
When the power is turned off by Auto Power OFF while Key Lock is on or is released temporarily, Key Lock is canceled.
●
It is also the same as when the power is manually turned off during temporary release.
Even while Key Lock is on, the following key operations can be performed. And, if an incoming call is answered or the
●
call is handled by Response and Hold or Answer Machine, Key Lock is released temporarily and the key operations can
be performed. When the call is ended, Key Lock is set again.
When there is a voice call, receiving the call by n, putting the call on hold by f, handling the call by Answer
･
Machine by holding down C for over a second and stopping the ring alert by C.
When there is a videophone call, receiving the call by n or t, putting the call on hold by f, handling the call
･
by Answer Machine by holding down C for over a second and stopping the ring alert by C
･
Stopping the alarm sound, etc.
･
Holding down a switch of the equipment such as the Flat-plug Earphone/Microphone with Switch (optional) for over a
second to make a voice call or receive a voice/videophone call.
When the display disappears while Key Lock is on, pressing f or receiving calls lights the display.
●
is indicated on the upper part of the display.
Setting Key Lock automatically
Key Lock can be set to be active automatically when the preset time (10 seconds to 5 minutes) has elapsed on
the standby display.
Default OFF
m8314
1
2
Select Key lock timer field
･
To cancel: Select the Key lock timer field
3
Select Timer field
136 Safety Settings
is indicated on the upper part of the display in
z 1
z 2
z 1 to 5
(in gray) is indicated on the upper
z
Go to Step 4
Key Lock
Keylock switch
or (in gray)
Key Lock Timer