NTT docomo FOMA D703i User Manual page 379

･
If there are more than one option page for
preferred day and time, switch to the next or
previous page with &.
■
Selecting from other than options
displayed:
z
a Select Others
and time-slot
b Select preferred day and time-slot
Connection is made to the server and the
options close to preferred day and time-slot
are displayed.
･
If there are more than one option page
for preferred time-slot, switch to the next
or previous page with &.
Press p to display the description of
･
the symbol on the left of time-slot.
c Select preferred day and time
Yes
･
If there are more than one option page
for preferred day and time, switch to the
next or previous page with &.
Press o
4
Reservation is completed and the menu is displayed.
･
is shown on the standby display when
reservation is made.
Checking/changing/canceling reservation
m864
1
2
Enter the terminal security code
the contents
Select preferred day
Availability for reservation at
each time-slot will be shown:
○ : available
△ : barely available
z
Select
z
Check
･
To stop checking:
Select OK
■
Changing reservation:
a Select Change
A confirmation screen for sending your
terminal ID is displayed.
b o
The option selection screen is displayed.
･
Follow the procedure from Step 2 in
"Updating software at pre-specified time".
☛P376
Pressing o on the confirmation screen
･
for sending your terminal ID makes
connection to the server and your private
information concerning the mobile phone
(such as model, serial number) is sent.
■
Canceling reservation:
a Select Cancel
A confirmation screen for sending your
terminal ID is displayed.
b oo
The reservation is canceled and the menu
is displayed.
Pressing o on the confirmation screen
･
for sending your terminal ID makes
connection to the server and your private
information concerning the mobile phone
(such as model, serial number) is sent.
When the reserved time arrives
When the reserved time arrives, the screen as shown
below is displayed and updating software is started
automatically. Before the reserved time, make sure
that the battery is fully charged and the handset is in
a location where radio waves reach and then show
the standby display.
When downloading is completed, rewriting software
is automatically started, followed by reload.
INFORMATION
Note that updating software may not be activated even
●
though the reserved time arrives in case of using the
other functions. In case the reserved time arrives while
talking or receiving messages, updating software starts
after finishing talking or receiving messages.
If software update is executed when ON is set for PIN1
●
Code On/Off, the PIN code entry screen will be displayed
at the time of automatic reload after completion of
software updating. You cannot make/receive calls and
operate communication functions if the incorrect PIN1
code is entered.
Appendix/Data Interchange/Troubleshooting
z
Select Yes
･
To cancel the software
update: f z
Select
Yes
377
Next