Setting the date and time
The time setting can be performed in 2 ways: obtaining the time information from the DoCoMo network
to automatically adjust the time setting of FOMA terminal, or manually entering the current time to the
terminal.
Default Auto time adjust: ON Offset: +, 00h00m
m8611
1
2
Select each item to set
Auto time adjust :Set whether to automatically correct the time.
:Specify the amount of time advance (+) or delay (-) so that your terminal's clock
Offset
advances from or delays to the time obtained for a given length of time.
:Enter the date and time.
Date, Time
・
The entered number can also be increased or decreased with %. You can also reenter the number after
・
highlighting it with &.
When the automatic time correction is set
The automatic time correction takes place when the UIM is inserted and you turn the power on in a location
where radio waves reach.
・
The automatic time correction sometimes causes a time error of several seconds. In addition, it may fail to
correct the time depending on the radio wave condition.
・
If the time information is received while i-
・
Even if Auto time adjust is set to ON, the time may not be corrected for a while. To enable the automatic time
correction, turn the power off and then on.
・
When no UIM is inserted or FOMA terminal is out of the service area, the automatic time correction is not
performed even if you turn the power off and then on.
INFORMATION
You cannot use the following functions when the date and time are not set:
●
・
Auto Power ON/OFF
・
i-
ppli Auto Start
α
・
Software Update
・
Scheduler (including data transfer and display of schedule data)
・
Downloading and playing i-motion with replay restrictions set
・
Downloading and playing Chaku-Uta Full
z
Press p
・
When you set Auto time adjust to ON, Offset can be set.
To enter the date and time manually, set Auto time adjust to OFF.
The date can be set from January 1, 2000 to December 31, 2050.
ppli is running, the time may not be corrected depending on the i-
α
・
Alarm Clock
・
i-
ppli DX
α
・
Update Definition
®
for which replay restrictions are set for copyright protection
・
Certificate Download
・
Flash movie which uses the date and time setting
・
SSL communication (authentication)
・
Machi-chara
・
Random Display Image
Before Using D703i
Date and Time Setting
ppli.
α
41
Next