Setting images being sent to the other party
You can change the image being sent to the other party or apply special effects to it during a videophone
call.
Switching the outgoing images
Press t during a call
1
Camera image
Setting the quality of outgoing and incoming images
・
Setting Prefer motion spd makes motions smoother in a little lower-definition image.
・
Setting Prefer img qual makes motions a little slower in a higher-definition image.
Default Normal
Example
Setting the quality of outgoing image
m41 during a call
1
Setting the quality of incoming image: m42 during a call
■
Press any of 1 to 3
2
Setting a frame on the outgoing images
The frame can be set while sending the camera image.
・
Only the frame with the display size of 176 x 144 or smaller can be selected. As for downloaded frames,
only the frame with the display size of 176 x 144 can be selected.
m31 during a call
1
2
Select a frame
72
Calls/Videophone Calls
・
Each press switches the image between the substitute image (
). ☛P76
the camera image (
・
Even when Chara-den is set as the substitute image, Chara-den may not be
displayed. If this happens, the default image for the substitute image setting is
sent to the other party. ☛P76
・
While sending the camera image, if you want to shoot an object from a very
short distance, swtich to the macro mode. ☛P152
To cancel sending the frame: o while sending a frame
・
Frames set by default ☛P349
・
or
) and
Frame