Advertisement

Quick Links

Easy Search/Contents/Precautions
®
FOMA
P906i
Before Using the Handset
Voice/Videophone Calls
'08.4
PushTalk
ISSUE DATE:
Phonebook
Sound/Screen/Light Settings
NAME:
Security Settings
Camera
PHONE NUMBER:
i-mode/i-motion/i-Channel
Mail
MAIL ADDRESS:
i-αppli
Osaifu-Keitai/ToruCa
GPS Function
INSTRUCTION MANUAL
1Seg
Full Browser/PC Movie
Data Display/Edit/Management
Music&Video Channel/Music Playback
Convenient Functions
Character Entry
Network Services
PC Connection
Overseas Use
Appendix/External Devices
Troubleshooting
Index/Quick Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FOMA P906i and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for NTT docomo FOMA P906i

  • Page 1 Easy Search/Contents/Precautions ® FOMA P906i Before Using the Handset Voice/Videophone Calls ‘08.4 PushTalk ISSUE DATE: Phonebook Sound/Screen/Light Settings NAME: Security Settings Camera PHONE NUMBER: i-mode/i-motion/i-Channel Mail MAIL ADDRESS: i-αppli Osaifu-Keitai/ToruCa GPS Function INSTRUCTION MANUAL 1Seg Full Browser/PC Movie Data Display/Edit/Management Music&Video Channel/Music Playback Convenient Functions Character Entry...
  • Page 2 FOMA phone and keep them in Before or during use of the FOMA P906i , make sure that you read this a safe place. Note that we cannot be held responsible for the unlikely...
  • Page 3 Search from the tabs printed on the cover. described as “Osaifu-Keitai compatible i-αppli”. See the next page for details. pNote that “FOMA P906i” is referred to as “FOMA phone” in this manual. pIn the operating procedures of this manual, key operations are described with P.6 From the Contents simplified key icons.
  • Page 4 How to search for “Alarm” is explained here as an example of search method. From the Index P.542 Additional service ....462 Additional guidance ...463 Address link function.
  • Page 5: Using Alarm

    Function name Menu number You can find this in (See page 35) Items shown on the Index. display (Some items cannot <Alarm> Function Menu while Alarm is Displayed be executed.) Using Alarm Function menu Operation/Explanation You can set Alarm to alert you at the specified time with an alarm tone, Edit Go to step 1 of “Using Alarm”...
  • Page 6: Easy Search

    Easy Search To retrieve the operation for the desired function with simple words, refer to the following: To know convenient functions for making calls To change/know display settings To/Not to notify your phone number to the other party To know the meaning of marks (icons) on the display .....<Display> 30 ..................<Caller ID Notification>...
  • Page 7 To use the FOMA phone with a sense of security Other things you can do ※1 To lock the FOMA phone from away when it gets lost ..<Omakase Lock> To reduce the battery consumption ......<Power Saver Mode> 118 To keep Phonebook entries from prying eyes ......
  • Page 8 Main Functions of FOMA P906i ..8 Accessories and Main Options ..24 Mail Security, Call Setting without ID, Reject Unknown, Making Full Use of FOMA P906i! ..10 etc. Phone Parts and Functions, Style, Display, Method for Before Using Cameras, Still Image Shoot,...
  • Page 9 About Using GPS Function, Position Location, Character Entry, Mode 1 (5-touch), Common Phrases, GPS compatible i-αppli, Provide Location, Cut/Copy/Paste, Own Dictionary, Learned Words, GPS Function Character Entry Notify of Location, Location History, Service Settings, Download Dictionary, Mode 2 (2-touch), GPS Settings Mode 3 (NIKO-touch) What is 1Seg?, Before Using 1Seg, Check New Messages, Voice Mail, Call Waiting,...
  • Page 10 P.278 Main Functions of FOMA P906i ◆GPS  You can use the location information obtained by GPS to search for a map of your FOMA (Freedom Of Mobile multimedia Access) is the name of the location and information of the surrounding area and navigate yourself to your DoCoMo service based on the W-CDMA format, authorized as one of the destination.
  • Page 11 P.425 P.373 ◆Bluetooth Function  ◆Voice Recorder  The wirelessly-connected FOMA phone and a Bluetooth device enable you to talk or You can record your voice as a substitute for taking notes. You can repeatedly listen to music while you are carrying the FOMA phone in your bag. play it back, so it is convenient to record the proceedings at a meeting, etc.
  • Page 12 P.195 Making Full Use of FOMA P906i! ◆i-Channel  i-Channel distributes graphical information such as news or weather forecast. By selecting a channel you want to see from the Channel list, you can obtain detailed P.50 ◆Videophone  expressive information created by Flash (see page 174).
  • Page 13 P.456 P.392 ◆2in1  ◆MUSIC Player  This service enables you to have two numbers/two mail addresses on your single On a single player, you can play back and enjoy Chaku-uta ® ® FOMA phone and to use your FOMA phone as if you were using two sets, by using the Full music files, Windows Media Audio (WMA) files, and...
  • Page 14 ■The following symbols show specific directions: Safety Precautions Always follow the safety precautions. ■Before using the FOMA phone, read these safety precautions carefully so that Denotes things not to do. (Prohibition) you can use it correctly. Don’t After reading the precautions, keep them in a safe place. ■Be sure to observe these safety precautions because they are designed to protect you or those around you from causing injury and to avoid unnecessary Denotes not to disassemble.
  • Page 15 Use only the batteries and Be careful not to let General precautions for FOMA adapters/chargers approved by electroconductive materials phone, batteries, adapters/chargers, DoCoMo for your FOMA phone. (metal pieces, pencil leads etc.) and UIM Don’t If you use any type of battery, adapter or contact with the charging charger other than the specified one, terminal or connector terminal.
  • Page 16 Turn off the FOMA phone in Precautions for FOMA phone Caution places where use is prohibited such as in airplanes and Warning hospitals. Do not place the FOMA phone or Otherwise, electronic devices and accessories on unstable electronic medical appliances may be locations such as wobbly tables Do not directly point the infrared adversely affected.
  • Page 17 Turn off the FOMA phone when When using the motion tracking, If you erroneously break the display part and then crystal near electronic devices using ensure that you check around liquid gets leaked, never take or high-precision control or weak you for safety, securely take hold Don’t Don’t...
  • Page 18 Itching, rash or eczema may be If the battery fluid gets into your Precautions for batteries caused depending on your eyes, do not rub them. Flush your ■Check the description on the label of the physical conditions or eyes with clean water and seek battery pack for the type of battery.
  • Page 19 The DC adapter is for use only in Use the adapter/charger at the Caution a negative (-) grounded vehicle. specified V AC. Do not use it in a positive (+) If you use it at a wrong voltage, fire or Don’t malfunction may result.
  • Page 20: General Notes

    When removing the adapter/ If you use an implanted cardiac Notes on using near electronic charger out of the outlet or pacemaker or implanted medical equipment cigarette lighter socket, do not defibrillator, use the mobile ■The description below meets “Guidelines on forcibly pull the adapter/charger phone 22 cm or more away from the Use of Radio-communication Equipment...
  • Page 21 ■Use a dry soft cloth such as the one for ■Do not use the FOMA phone with the back Notes on handling the FOMA phone cleaning glasses to clean the equipment. cover left removed. ■Avoid using in extremely high or low pThe screen of the FOMA phone sometimes has a The battery pack might come out, or malfunction or temperatures.
  • Page 22 ■It is recommended that you make separate ■Note that even if any leak of data or Notes on handling chargers/adapters notes of the information stored on the UIM information occurs while making connection ■Charge the battery in a place with an and keep such notes in a safe place.
  • Page 23 ※1 The FOMA phone and all Bluetooth function-installed Caution ■Cautions on Using Bluetooth Devices devices have ensured that they conform to the Bluetooth operates at radio frequencies assigned to ■Do not use the modified FOMA phone. Using Bluetooth Specification according to the rules the the in-house radio stations for mobile object a modified FOMA phone infringes the Radio Bluetooth SIG defines, and are all authenticated.
  • Page 24: Intellectual Property Rights

    Bluetooth SIG, Inc. and any use of “Security Scan”, “i-motion mail”, “i-area”, “Short Mail”, “WORLD WING”, “Public mode”, such marks by NTT DoCoMo, Inc. is under license. Other trademarks and trade names “DoPa”, “sigmarion”, “musea”, “IMCS”, “OFFICEED”, “2in1”, “Chokkan Game”, and the are those of their respective owners.
  • Page 25 pContains Adobe pThis product uses GestureTek’s technology. ® ® ® ® Flash Lite™ and Adobe Reader LE technology by © Adobe Systems Incorporated Copyright 2008, GestureTek, Inc. All Rights Reserved. pThe abbreviations used for respective operating systems (Japanese version) in this ©...
  • Page 26: Accessories And Main Options

    Accessories and Main Options <Accessories> <Main Options> pFOMA P906i Handset pFOMA P906i CD-ROM pFOMA AC Adapter 01/02 (With Warranty and Back Cover P26) The PDF versions of “Manual for PC Connection” (With Warranty and Instruction Manual) and “Kuten Code List” are included. pInstruction Manual pBattery Pack P16 pDesktop Holder P27...
  • Page 27 Before Using the Handset Phone Parts and Functions ......Styles ..........Navigation Displays and Key Operations .
  • Page 28: Clear Key

    Phone Parts and Functions Earpiece ・For listening to the other party’s voice Display (See page 30) l Mail key ・For showing the Mail menu (See page 220) ・For operating the function corresponding to the navigation displays (See page 29) <Press and hold for at least one second> ・For checking new mail messages (See page 215) m Menu key/IC Card Lock key ・For showing Main Menu (See page 33)
  • Page 29 Inside camera x Multi key microSD card slot ・For inserting microSD card (See page 355) ・For shooting photos of yourself (See page 148) ・For showing the Multitask menu (See page 406) ・For catching sight of yourself during a videophone call Back cover <Press and hold for at least one second>...
  • Page 30 Information Styles pWhen you press the one-push open button in Horizontal Open Style, the FOMA phone will open in Normal Style after it is closed. The P906i comes with two styles. pBefore switching the styles, be sure to completely close the FOMA phone. If you ■Normal Style operate the horizontal open lever in Normal Style or with the display part unlatched, You can open the FOMA phone easily by one-push key operation.
  • Page 31 ■Operating Command Navigation key Navigation Displays and Key Operations Right/Redial ・Moves the cursor or highlighted ・Moves the cursor to the right. Key Operations in Normal Style ・Press from the Stand-by display to display up. (Press and hold to scroll continuously.) bring up the Redial list.
  • Page 32 Display " <Private window> Battery level (estimate) (See page 44) Unread Messages R/F exist. A microSD card is inserted.(See page 356) (See page 235) (yellow) Radio waves reception level (estimate) Data is being read to/written from the microSD card. The area for Messages R/F in the FOMA Strong Weak phone is full.
  • Page 33 During IC Card Lock (See page 275) During infrared data exchange Voice mail messages for Number B are held ∼ ・ (See page 367 and page 371) at the Voice Mail Center in Dual Mode of Both Keypad Dial Lock and Personal Data 2in1.
  • Page 34 When a new mail message or Message R/F is received <Icons> When the FOMA phone is closed, a Feel*Mail image is played Displaying Description of Icons back, and then “New mail” appears. When you press <, the latest Feel*Mail image is played back. The symbols on the display (such as , and ) are called icons.
  • Page 35: Change Clock Display

    Change Clock Display Scroll Selection You can change displayed contents by pressing < while clock is shown. In this manual, the description of the command navigation key operation o after selecting/ (selection of top/bottom/left/right, and press of entering a function item) is omitted. Scroll selection is explained below using the example of selecting the function “Quality alarm”: Time only Icons and Date/time...
  • Page 36 Select a main menu icon from the menu function Select a sub-menu item from the menu function Select “Settings” from Main Menu. Main Menu at purchase differs depending on the Select “Talk” from “Settings”. body color. (See page 486) Main Menu pThe highlighted item is the currently selected one.
  • Page 37 Select a desired lower sub-menu item (function) Set or check the function Select “Quality alarm” from “Talk”. Some menu items have even more detailed menus. The example below shows how to set “Low tone” for “Quality alarm”. pPress o to highlight the item below, and o to highlight the item above.
  • Page 38: Function Menu

    Function Menu Bring up the function using the menu number If you press i when “ ” appears at the lower right of the display, the Function menu including selectable items such as “Save”, “Edit”, and “Delete” appears in each operation. The contents of the Function From the Stand-by display, press m75.
  • Page 39 An actual operation is done as follows: Check box With the functions you can select multiple items, put a check Press mark for check boxes to select them. Each time you press ), you can switch “ ” and “ ”.
  • Page 40 Using Simple Menu Configuration of Simple Menu Simple Menu is a menu focusing on only basic functions for easy Phone Mail i-mode Camera operation. pThis manual describes the operating procedures in Normal Main Menu only. For how to operate in Simple Menu, see the respective pages of each function. pYou cannot use the Multitask function.
  • Page 41 <Guide> Using UIM (FOMA Card) When You do not Remember Key Operation The UIM is an IC card that holds your information such as phone numbers. It can hold data such as Phonebook entries and SMS You can search for the functions you want to know and use, and then messages as well.
  • Page 42 Information Your UIM pMake sure that you insert/remove the UIM with the FOMA phone closed and held in ♪ ♪ ♪ ♪ ♪ ♪ ♪ ♪ ♪ ♪ your hand. pTake care not to force the UIM into place because this can break it. pTake care not to lose the UIM once you remove it.
  • Page 43 Information ■WORLD WING pWhen the UIM restrictions are set for data and files, you cannot set those data and WORLD WING is the DoCoMo FOMA international roaming service that enables you to use the current phone number overseas for making and receiving calls using the files for the functions such as “Display setting”...
  • Page 44 1Seg programs and so on for a long time during charging. A, slide the back cover (2 mm or For environmental protection, bring the unneeded battery more) in the direction of B to pack to an NTT DoCoMo, dealer, or recycle shop. Li-ion 00 unlock. Charging...
  • Page 45 Do not charge for long periods of time (several days) with the FOMA Estimated time for charging battery pack phone turned on. AC adapter Approx. 000 minutes DC adapter Approx. 000 minutes pIf you leave the FOMA phone powered on for long periods of time during charging, you ※The charging time is an estimate of time for when empty battery pack is charged with may not be able to use the FOMA phone for long duration as expected and the low the FOMA phone turned off.
  • Page 46: Checking Battery Level

    When charging is completed, hold the desktop holder <Battery Level> and lift up the head of FOMA phone to remove. Checking Battery Level pUnplug the AC adapter from the power socket when you are not going to use it for a long time.
  • Page 47: Switching To English

    Information <Power ON/OFF> pEach entry display appears in the order of “PIN1 code” → “Terminal Security Code” Turning Power On/Off → “PIN2 code”. pThe mail message “未定” has been saved by default. Press o twice or operate Turn Power On “Display Mail from Inbox”...
  • Page 48: Setting Date And Time

    Information <Initial Setting> pThe completed settings are valid even when total setting is interrupted by an incoming Executing Initial Settings h or r midway. call or canceled by pressing pWhen the power is automatically turned on by alarm notification, the Initial Setting If the date and time, Terminal Security Code, Keypad Sound, Location display does not appear even if there is any unset function.
  • Page 49: Summer Time

    About date/time correction function Summer Time The time displayed on the FOMA phone is corrected according to the clock information You can advance the time displayed for the overseas country you stay obtained from the network. and for a region of World Time Watch by one hour. The time is corrected when you show the Stand-by display with “Auto time adjust ON”...
  • Page 50 )Notify caller ID <Own Number> Don’t notify or Notify caller (OFF or ON) Checking Your Own Number pTo release “Notify caller ID”, select “Cancel prefix”. Whether to notify or not pYour phone number (own number) is stored on the UIM. follows the setting for “Activate”...
  • Page 51 Voice/Videophone Calls Making Calls/Videophone Calls When You Cannot or Could not Answer the Call About Videophone ........Putting an Incoming Call on Hold when You cannot Answer at Once Making a Call/Videophone Call .
  • Page 52 About Videophone Making a Call/Videophone Call You and the other party can talk viewing each other’s images. Enter the other party’s phone number, DoCoMo videophones conform to 3G-324M, standardized by the international standard starting with the city code. 3GPP. You cannot connect to the videophone that uses a different format. pWhen 27 or more digits are entered, the lower 26 digits p3GPP (3rd Generation Partnership Project): only are displayed.
  • Page 53 Information When Making a Videophone Call <For Voice Calls> Press l( pYou can make a voice call also by pressing d and then entering the party’s phone p“ h to clear the display and then redial. number. If you enter a wrong number, press ”...
  • Page 54 If a videophone call could not be connected Auto-redialing The reason why it could not be connected is displayed. (The displayed reason might not If “Voice call auto redial” is set to “ON”, and a videophone call is not connected, a voice be the same as the actual reason depending on the type of the other party’s phone and call is automatically made.
  • Page 55 Switching between a Voice Call and Switch from a Videophone Call to Voice Call Videophone Call When the other party’s phone has a function to switch between calls, you can switch from a videophone call to a voice call by selecting “CHG to You (caller) can switch between a voice call and a videophone call.
  • Page 56: Using Call Records

    Dialed and received calls/missed calls of international videophone <Redial> <Dialed Calls> <Received Calls> ※ call Using Call Records Dialed calls of 64K data communication ※ Received calls/missed calls of 64K data communication The FOMA phone can store the other party’s phone number and date/ time you have dialed or received.
  • Page 57 Select a call record. Select a received call record. pThe other party’s phone number is displayed if it is The detailed display for the call record is displayed. pWhen the other party is stored in the Phonebook, the provided. If this caller is stored in the Phonebook, the phone number, name, and icon are displayed.
  • Page 58 Function menu Operation/Explanation Function Menu while Redial/Dialed Calls/Received Calls is Displayed YES Delete this Function menu Operation/Explanation Put a check mark for redial items, dialed call records, or Delete selected Notify caller ID See page 47. received call records to be deletedl( )YES Enter your Terminal Security CodeYES Prefix numbers...
  • Page 59: Store Messages

    )Chaku-mojiDo the following operations. <Chaku-moji> Using Chaku-moji Function menu Operation/Explanation When making a voice call or videophone call, you can send your text Create message You can create a Chaku-moji message just before dialing. message to tell the subject during calling. Enter a message.
  • Page 60: Sent Messages

    Information Function Menu while Detailed Sent Message is Displayed pWhen a videophone call is not connected and automatically dialed as a voice call, the Chaku-moji message is resent as well. Function menu Operation/Explanation pChaku-moji does not support PushTalk. Store You can store a sent Chaku-moji message in the Message list. pYou cannot send/receive Chaku-moji messages overseas.
  • Page 61 Check that the line is connectedd or <Pause Dial> A number string up to the first pause (p) is sent, and a number string up to the next Sending Touch-tone Signals pause (p) is displayed. A number string up to the pause (p) is sent each time you press d or You can send touch-tone signals from your FOMA phone to use services such as reserving tickets, checking bank balance, etc.
  • Page 62: International Calls

    <WORLD CALL> Enter a Phone Number to Make an International Call International Calls Enter numbers in order of 009130→010→country code→ area code (city code)→destination phone number WORLD CALL is the international call service available from DoCoMo d or mobile phones. When you have signed up for FOMA service, you have contracted to use pWhen the area code (city code) begins with “0”, enter it except for the “0”.
  • Page 63 International Dial Assist Country Code Setting You can make a call adding a country code or international call access You can store up to 27 country codes to be added for making code to a phone number. (Except for some countries and regions, if the international calls from overseas.
  • Page 64 )Prefix numbersSelect a name Function menu Operation/Explanation d or YES Delete this pPress l( ) to make a videophone call and press p to make a PushTalk Enter your Terminal Security CodeYES Delete all call. pFor making a PushTalk call, adding a prefix number such as “186” or “184” to the Information beginning of the phone number is disabled.
  • Page 65 Information Information pThe reconnectable time differs depending on the usage status and radio wave conditions. pWhile the Flat-plug Earphone/Microphone with Switch (option) is connected, you An estimate is about 10 seconds and the call charge is applied also for that duration. cannot hear voice through the speaker even if you switch to Hands-free.
  • Page 66 Information For Answering a Videophone Call pThe receiving operation while Record Message is activated works in accordance with Press d or ) to answer the “Record message setting” setting. the videophone call. pWhen the sound is set to output from the FOMA phone, the FOMA phone works in accordance with “Setting when closed”...
  • Page 67 Information Function Menu while a Call is Ringing <For Voice Calls> pWhen “Answer setting” is set to “Any key answer”, the call is placed on hold if you Function menu Operation/Explanation < with the FOMA phone closed. If you have set “Setting answer the call by pressing Call rejection You can disconnect the call without answering.
  • Page 68 <Answer Setting> You can start talking by pressing a key shown below: Setting Response of Key Operation for Voice call Answering Incoming Calls Videophone o , m call You can set to start talking (Any key answer) or to stop the ring tone PushTalk call d, o , p (Quick silent) by pressing a key besides d,...
  • Page 69 Information <Setting when Closed> pIf you set to “No tone” or “Tone on”, “Holding” is displayed on the Private window Setting Response for when Closing FOMA when the FOMA phone is closed. pEven when “End the call” has been set, the call does not end if you close your FOMA Phone during a Call phone from Horizontal Open Style.
  • Page 70 <Ring Volume> <On Hold> Adjusting Ring Volume Putting an Incoming Call on Hold when You cannot Answer at Once You can adjust the ring volume for incoming calls and mail. mSettingsSoundRing volume During ringingh Select an incoming type The FOMA phone makes three rapid beeps for confirmation and the call is put on Use o to adjust the volume.
  • Page 71 Press d or ) to release hold and answer <Public Mode (Drive Mode)> the call. Using Public Mode (Drive Mode) pIf a videophone call is on hold, the image through your camera is sent to the other party by pressing d or ) to release hold.
  • Page 72 When Public Mode (Drive Mode) is activated When Public Mode (Power Off) is activated ・Even when a call comes in, the ring tone does not sound. The “Missed call” icon The setting stays activated until you dial “:25250” to deactivate Public Mode (Power appears on the display and the call is stored in “Received calls”.
  • Page 73 Responses to Incoming <Record Message Setting> Service Responses to Incoming Voice Calls Videophone Calls Recording Voice/Video Messages when Caller ID For the caller without a caller ID, plays For the caller without a caller ID, Display back the Caller ID Request guidance, plays back the video guidance for You cannot Answer the Call Request...
  • Page 74 Information Incoming calls when Record Message Setting is set to “ON” pWhen Voice Mail Service or Call Forwarding Service is set at the same time as Record Message, the priority depends on the ring time set for Voice Mail Service or Call Forwarding Service.
  • Page 75 To skip to next message <Play/Erase Messages> <Play/Erase Videophone Messages> Each time you press > during playback, messages are played back in the following Playing Back/Erasing Record Messages/a order: the next new record message → the oldest record message → a voice memo. Voice Memo/Videophone Record To cancel playback midway Messages/Movie Memos...
  • Page 76 Function menu Operation/Explanation Substitute Image Erase rec. msg. You can erase all record messages from the Record Message You can set a Chara-den image for “Substitute image” of “Select image”. list, and can erase all videophone record messages from the Chara-den display/Chara-den list/Chara-den Recording Videophone Record Message list.
  • Page 77 Useful Functions for Videophone Calls Switch Image Display Positions You can switch the display locations of the receiving image and the Switching Cameras sending image. During a videophone call, press c( At videophone start-up Inside camera pEach time you press You can switch images to be sent to the other party from through the ), the displays inside camera to through the outside camera.
  • Page 78 Function menu Operation/Explanation Zoom V.phone settings You can adjust the colors of the camera image to be sent to the At videophone start-up Wide (White balance) other party, to make the colors look more natural. White balanceSelect an item. At videophone You can adjust the magnification for the camera image to be sent to the Fine weather .
  • Page 79 <Hands-free with Videophone> <Select Image> Setting Videophone Hands-free Changing Image Displays for Videophone Calls You can set whether to switch to Hands-free automatically for when a videophone call starts. You can set an image to be sent to the other party. mSettingsVideophoneHands-free w/ V.
  • Page 80 Set by Call <Notify Switchable Mode> Setting for Switching between a Voice Call You can set an image to be sent to the other party for making a videophone call. and a Videophone Call Enter a phone number You can let the other party know that your FOMA phone can switch between a voice call and videophone call.
  • Page 81 Information Information pWhen you have signed up for Call Waiting Service, an incoming videophone call from pIf you have not signed up for Voice Mail Service or Call Forwarding Service, “Packet an external device during a voice call is recorded as a missed call in Received Calls. downld priority”...
  • Page 82 SetON For answering a videophone call without starting Remote pWhen receiving videophone calls from the phone numbers stored as “Other ID”, Monitoring at the receiving end the FOMA phone automatically answers to start Remote Monitoring after the ring Press d or ) before the FOMA phone answers a videophone call time elapses.
  • Page 83 PushTalk What is PushTalk? ........Making a PushTalk Call .
  • Page 84 When the other party answers, talk What is PushTalk? while pressing p. You can communicate with multiple persons (up to five persons When the other party answers, a confirmation tone for including yourself); press the PushTalk key to access the PushTalk starting communication sounds.
  • Page 85 ■Display while dialing/communicating Information The phone number of the member who has the talker’s pWhether to notify others of your phone number when you make PushTalk calls follows right is displayed, and the state of the talker’s right is the setting for “Activate” of “Caller ID notification” (see page 47). However, when you displayed in color of the round icon at the upper left.
  • Page 86 Information Adding a Member during PushTalk pThe caller cannot add members if he/she uses a PushTalk compatible model which Communication does not have this function. pFor a member who uses a PushTalk compatible model which does not have this You can make a PushTalk call to another member during PushTalk function, the members added during PushTalk communication are not shown and a communication and add that member to the communication.
  • Page 87 Press h to end the communication after talking. Information pWhen a PushTalk call comes in during Lock All or Omakase Lock, “ ” appears A tone for confirming the end of communication sounds at the other end. pWhen the call you received is a group call, the PushTalk communication itself after the lock is released.
  • Page 88 Item Operation/Explanation Function menu Operation/Explanation Select a search method. View call records You can access a dialed call record or received call record to Search store it in the PushTalk Phonebook. You cannot store in the Reading? . . . See page 98. PushTalk Phonebook from the dialed/received call record of the Group? .
  • Page 89: Deleting Pushtalk Phonebook Entries

    Put a check mark for members you Delete Group Members want to make a call to Group Member listi( )DEL group members p or l( Do the following operations. pWhen you do not check any members, the call is made Group Member list to the highlighted member.
  • Page 90 Function menu Operation/Explanation Function menu Operation/Explanation Store in P-Talk PB See page 85. Network connection You can connect to the network to use PushTalkPlus. This is [Phonebook list only] available only when you have singed up for PushTalkPlus. (See page 82) DEL from P-Talk PB See page 87.
  • Page 91 Item Operation/Explanation Vibration setting You can set whether to notify you by the vibration when you try to get the talker’s right, or when a member’s state changes to “Connected”. ON or OFF Information <Auto answer setting> pWhen you set to “ON”, calls are automatically answered even when the FOMA phone is closed regardless of “Setting when closed”.
  • Page 93 Phonebook Phonebooks Available for FOMA Phone ....Storing Phonebook Entries... <Add to Phonebook> Storing Displayed Phone Number/Mail Address in Phonebook Setting Groups .
  • Page 94 FOMA phone Phonebooks Available for FOMA Phone Name ○ ○ Ring tone You can use two types of Phonebook, namely the Phonebook in the Vibrator FOMA phone itself, and the Phonebook on the UIM. Illumination FOMA phone Picture Number of entries 1,000 entries 50 entries Chara-den...
  • Page 95 Item Operation/Explanation Item Operation/Explanation Phone number You can store up to four phone numbers per Phonebook entry in Name You can enter the name of the person or company in kanji, the FOMA phone. You can set an icon for each phone number to hiragana, katakana, alphabetic characters, or numerals.
  • Page 96 Item Operation/Explanation Item Operation/Explanation Select an item. Mail address You can store up to three mail addresses per Phonebook entry in Location the FOMA phone. You can set an icon for each mail address to information By position loc. categorize mobile phone addresses, home addresses, and so on. .
  • Page 97 Item Operation/Explanation Item Operation/Explanation Image The stored still image is displayed when you call up the Vibrator You can set a vibration pattern for when a voice call or Phonebook entry. videophone call comes in from the person stored in the Select an item.
  • Page 98: Add To Phonebook

    Item Operation/Explanation Storing Displayed Phone Number/Mail Mail illumination You can set an illumination color for when a mail message comes Address in Phonebook in from the person stored in the Phonebook. Select illuminationSelect a color. You can store the displayed or selected phone number, mail address, pTo release the stored mail illumination, select “Release and still image in the FOMA phone’s or UIM’s Phonebook.
  • Page 99: Setting Groups

    Phone or UIMSelect a storing method. <Group Setting> New . . . Go to step 2 on page 92. Setting Groups Add . . . Adds data to the existing Phonebook entry. When storing data on the UIM, “Overwrite” is displayed. You can utilize the Phonebook by sorting the entries by group such as Select a search methodSearch the Phonebook “Company”...
  • Page 100 Item Operation/Explanation <Search Phonebook> Phone number? You can enter a part of the other party’s phone number and Dialing from Phonebooks search. You can search for the entry even from the middle of phone number. You can retrieve stored Phonebook entries by eight search methods. Enter a part of the phone numberB o Do the following operations.
  • Page 101 About Phonebook List About the detailed display o to highlight a tab, then the detailed contents are displayed. When you search from “All?”, “Reading?”, “Group?”, or pFor the Phonebook entry stored “Memory No.?”, the tabs appear on the top of the Phonebook Group Memory No.
  • Page 102: Deleting Phonebook Entries

    Item Operation/Explanation <Edit Phonebook> Put a check mark for Phonebook entries to be deleted Delete selected Editing Phonebook Entries )YES pYou can check or uncheck all items by pressing i( Detailed Phonebook displaym( and selecting “Select all in tab/Select all/Release all in tab/ Select an item to be editedEdit the contents.
  • Page 103 Function menu Operation/Explanation Information pWhile you are using 2in1, the number of displayable Phonebook entries for each Send to Bluetooth You can send all Phonebook entries using Bluetooth mode is displayed. (See page 459) (Send all communication. Send all phonebookSelect a Bluetooth device to be sent phonebook) Making Full Use of Phonebooks Enter your Terminal Security CodeYES...
  • Page 104 Function menu Operation/Explanation Function menu Operation/Explanation 2in1 dial You can select a phone number to notify the other party in Dual Copy to microSD See page 357. Mode of 2in1. (See page 458) Connect to Center See page 105. Multi number You can select a phone number to be notified to the other party.
  • Page 105 Function menu Operation/Explanation Information pWhen the Phonebook entry contains multiple phone numbers, the first phone number Copy to UIM/ See page 422. will be dialed. Copy from UIM pWhen you set “Restrict dialing” to a Phonebook entry of memory number 000 through Select image See page 78.
  • Page 106 Information Information pThe voice dial name set by this function is effective only for calling up a voice dial pWhen you vocalize, keep your mouth away from the microphone about 10 cm. If your entry. For the voice guidance function, the reading (name) stored in the Phonebook is voice is too distant, it may be difficult to recognize your voice.
  • Page 107: Voice Settings

    Access a voice dial entry following the voice guidance. <Data Security Service> Once the voice is recognized as a voice dial entry, the detected result is displayed. Saving (Restoring/Updating) Phonebook pThe FOMA phone automatically dials out about two seconds after the voice to Data Storage Center guidance informing of dialing finishes.
  • Page 108 Information <Sent/recv. PB data list> pUp to 30 records are saved. When more than 30 records are saved, the older records are overwritten. <PB image sending> pYou cannot save the images whose output from FOMA phone is prohibited. Auto-update On the site of the Data Storage Center, you can set so as to periodically update and save the Phonebook entries in your FOMA phone to the Data Storage Center.
  • Page 109 Sound/Screen/Light Settings Sound Settings Screen/Light Settings Changing Ring Tone....<Select Ring Tone> 108 Changing Displays..... <Display Setting> 115 Setting Sound Effects of Ring Tone or Melody Displaying an Image Stored in Phonebook during Ringing .
  • Page 110 Display Title The Name of Lyricist/Composer <Select Ring Tone> Mail 1 ー ー Changing Ring Tone Mail 2 ー ー 美ら海 カクレクマノミ You can set ring tones by incoming type. ※2 美ら海 カクレクマノミ (CHURAUMI ー If you select an i-motion movie, the i-motion movie and sound are played KAKUREKUMANOMI) back for incoming calls/messages.
  • Page 111 Information <Melody Effect> pThe priority order of ring tones is as follows: “Read aloud settings” → “Setting for Setting Sound Effects of Ring Tone or Phonebook entry” → “Group setting” → “Select ring tone”. When a call comes in to the additional number, the ring tone specified by “Set as ring tone”...
  • Page 112 <Vibrator> <Voice Announce> Informing You of an Incoming Call by Using Recorded Sound as Ring Tone Vibration You can set the sound you recorded with the FOMA phone for a ring tone (including a ring tone for Number B of 2in1), On hold tone/Holding tone, You can set the vibrator to notify you of incoming calls and mail.
  • Page 113 Information <Quality Alarm> pMelody Call is not available for incoming videophone calls and PushTalk calls. Sounding Alarm when a Line is Likely to pWhen you select “YES” from the confirmation display asking whether to connect to the be Disconnected site, the line is connected to the i-mode site. You are not charged a packet communication fee for connecting to the site for settings, however, you are charged When a call is likely to be disconnected midway due to bad radio wave for connecting to the IP site, i-mode menu site, and free melody corner.
  • Page 114 <Headset Usage Setting> <Manner Mode> Sounding Ring Tone from Earphone Only Silencing Tones from FOMA Phone You can set where you make the ring tone and alarm sound from for Just by pressing a key, you can set to silence tones such as a ring tone when you connect the Flat-plug Earphone/Microphone with Switch and keypad sound from the FOMA phone.
  • Page 115 Information <Manner Mode Set> pWhen a Flat-plug Earphone/Microphone with Switch (option) is connected, the sound Selecting Manner Mode Type comes out of the earphone. The confirmation display asking whether to play back sound or music files during Manner Mode does not appear. Further, the playback tone You can select one of three types of operations for Manner Mode.
  • Page 116 You can select from among standard “Manner mode” to inform you of Manner Super Original incoming calls or mail by the vibrator, “Super silent” to erase sounds Mode Silent including confirmation tones from the earpiece, or “Original” to Works with the same set value as ①. ToDo alarm Silent ※7...
  • Page 117 Item Operation/Explanation When Calendar/schedule is set ON or OFF LVA tone You can display schedule events of the day (up to 10) or pSee page 44 for LVA Tone (low battery alarm). calendar in the set format on the Stand-by display. You can check the schedule event or calendar and can set schedule Press l( events (see page 411) with ease.
  • Page 118 Not to display icons on the Stand-by display Set Displays for Dialing/Calling and Others Press h from the Stand-by display. You can set an image for the Dialing/Call Receiving display, Mail Calendar, schedule events, status icons, notification icons, and desktop icons are Sending/Mail Receiving display, and Checking display.
  • Page 119 Information <Private Window> pThe images or ring tone set at purchase might be displayed or played back for Setting Displays for Private Window incoming calls or messages, depending on the combination of this function and “Select ring tone”. mSettingsDisplayPrivate windowON or OFF pYou cannot set some images for “Display setting”.
  • Page 120 Item Operation/Explanation <Received Mail/Call at Open> Standard or Constant light Charging Displaying Arrival Information by Opening Standard..Lights during charging in the same setting FOMA Phone as it lights in ordinary time. Constant light .
  • Page 121 Information To switch View Blind on/off by pressing one key pWhen an image other than still image is set for the Stand-by display, the Stand-by Press and hold 8 for at least one second. display shifts to Power Saver Mode after the image is played back and a standby time pWhile an i-αppli program is running or PDF file is displayed, you cannot switch View elapses.
  • Page 122 When you select “Customize” in step 1, <Menu Icon Setting> select a menu icon or background Setting Display of Main Menu image to be changed Select a folderSelect an image. You can change the icons and the background images of Main Menu. mi( )Menu icon settingSelect a pattern.
  • Page 123 Information <Kisekae Tool> pIf you use Kisekae Tool to change the design of the Menu display, some menu Using Kisekae Tool configurations change according to the usage frequency depending on the type of the menu. Further, some menu numbers that are assigned to the menu items do not You can use Kisekae Tool to change the ring tone, Stand-by display, apply.
  • Page 124 mSettingsFeel*MailDo the following operations. Information pEven if you perform “Reset disp. /sound” or “Reset menu screen”, you cannot reset “Character size”. Item Operation/Explanation pEven if you execute “Reset menu screen”, the Main Menu items you have manually Disp. /play new one A Feel*Mail image is played back after you receive an i-mode replaced by “Change launcher”...
  • Page 125 Item Operation/Explanation Item Operation/Explanation Music&Video ch The Call/Charging indicator flickers when obtaining Music&Video Side key You can set the lighting color of the Call/Charging indicator for when you press < with the FOMA phone closed. illum. Channel programs is completed at about 5-second interval for illumination Select a color.
  • Page 126 Information > If you press while the FOMA phone is closed <Set color> When you have a missed call, new mail, new chat mail, or new Message R/F pThe priority order of illumination is; “Setting for Phonebook entry” → “Group setting” (When the “Missed call”...
  • Page 127 Record message for voice calls <Desktop Icon> ∼ Shows the display for Rec. Msg/Voice Memo. Using Icons on Desktop (See page 71, page 73, page 110 and page 418) Record message for videophone calls Shows the display for Rec. Msg/Voice Memo. ∼...
  • Page 128 Missed alarm URL for Full Browser Shows the contents of the alarm that could not be notified. Shows the site of that URL by Full Browser. (See page 314) (See page 410) Sender’s/Destination address of i-mode mail Missed program Shows the Message Composition display with the mail address entered. Shows the contents of the booked program that could not be notified.
  • Page 129 使いかたナビ (Guide) Proceed to Respective Functions from Icons on Desktop Shows the display for 使いかたナビ (Guide). (See page 39) Press Bar Code Reader pYou cannot select the icon even when you press Shows the Bar Code Reader menu. (See page 165) when the Stand-by display appears on the horizontal Receive Ir data display.
  • Page 130 Function Menu of the Desktop Icon List Change Character Font and Color of Phone Numbers pYou can bring up the Function menu also by pressing i( You can set the font and color of phone numbers or the name stored in ), while highlighting a Phonebook displayed on the following display: desktop icon from the Stand-by display.
  • Page 131 Item Operation/Explanation <Character Size> i-mode You can set the character size of text on sites and on the displays Changing Character Size within “i-mode settings” memos. Extra large, Large, Standard, or Small mSettingsDisplayCharacter size i-Channel ticker You can set the character size for the tickers of i-Channel. Do the following operations.
  • Page 132: Setting Clock Display

    ■When the character size is set, the display appears as shown below: Item Operation/Explanation <For Detailed Received Mail display> Black or White Color Information <Position> pEven if you set any of “Pattern 3” through “Pattern 13”, the clock is displayed in “Pattern 2”...
  • Page 133: Security Settings

    Security Settings Passwords Restricting Outgoing/Incoming Calls or Messages Passwords......... . . 132 Setting not to Display Redial/Received Calls Changing Terminal Security Code .
  • Page 134: Network Security Code

    Passwords Network Security Code The Network Security Code is a four-digit number for procedures on For some functions of the FOMA phone, you need to enter your DoCoMo e-site or for using network services. This is determined at the password. In addition to the Terminal Security Code for operating time of contract but can be changed by yourself.
  • Page 135: Setting Pin Code

    When the PIN1 Code/PIN2 Code Entry display appears, enter your four- to <Change Security Code> eight-digit PIN1 code/PIN2 code and press Changing Terminal Security Code pThe entered PIN1 code/PIN2 code is displayed as “_”. pIf you enter a wrong PIN1 code/PIN2 code three times in Change the default for the Terminal Security Code required for operating succession, it is locked and the FOMA phone cannot be functions to your own four- to eight-digit code so that you can make full...
  • Page 136: Releasing Pin Lock

    Enter the new PIN1 code/PIN2 code again. Change PIN1 Code/Change PIN2 Code You need to have set “PIN1 code entry set” to “ON” to change the PIN1 code. <Lock All> mSettingsLock/SecurityUIM setting Locking your Phone to Prevent Use by Enter your Terminal Security Code Others Change PIN1 code or Change PIN2 code Enter the current PIN1 code/PIN2 code.
  • Page 137 Information <Omakase Lock> pOmakase Lock can be set even when another lock function is set. However, if you Using Omakase Lock have set Public Mode (Drive Mode) before setting Omakase Lock, you cannot receive voice calls and videophone calls. When you have lost your FOMA phone or in other cases, you can use this pOmakase Lock cannot be set when the FOMA phone is out of the service area, turned service to remotely lock the FOMA phone in which your contracted UIM off, or during Self Mode.
  • Page 138: Locking Functions Regarding Personal Information

    mSettingsLock/SecurityPersonal data lock <Personal Data Lock> Enter your Terminal Security Code. Locking Functions Regarding Personal “ ” appears and Personal Data Lock is set. Information pTo release Personal Data Lock, perform the same operation. When Timer Lock ON At Close is set, the display for releasing Personal Data Lock appears also by To prevent other people from reading or tampering with your personal opening the FOMA phone.
  • Page 139 <Lock Setting> PIM/IC Security Mode Setting a Variety of Locks You can set the way to release Personal Data Lock and IC Card Lock. mSettingsLock/SecurityLock setting Timer Lock ON At Close PIM/IC security mode You can set “Timer Lock ON At Close” that automatically activates Enter your Terminal Security Code Personal Data Lock or IC Card Lock when the specified time has elapsed Select a security mode.
  • Page 140 <Face Reader Setting> Store Using Face Reader To use Face Reader, store 3 or more face data files. You can store up to 10 face data files. You can store your face data files in Face Reader and use it for mSettings authentication when releasing IC Card Lock or Personal Data Lock.
  • Page 141: Change Security Code

    Information Recognition-failed Image pAt shooting, the Call/Charging indicator flickers in red and the shutter tone sounds The images not judged as yourself by Face Reader recognition operation regardless of the Manner Mode setting. The sound volume for shutter tone cannot be are saved.
  • Page 142 Enter a new Face Reader Security Code (four to eight When “Face reader security” is set to “High” digits)YES After you are successfully authenticated by Face Reader, your eye blinking is checked. Repeat blinking your eyes slowly. When the detection of eye blinking fails, the authentication also fails.
  • Page 143 Information <Secret Mode> <Secret Data Only> pIf you set Keypad Dial Lock, you can send mail only when the address is called up Protecting Phonebook Entries and from the Phonebook and when the address stored in the Phonebook is called up from Sent Address or Received Address.
  • Page 144 Information <Mail Security> pWhen you make a call to the party stored as secret data, his/her name is not Setting not to Display Mail in Mail Box displayed but the phone number is displayed on the Dialing/Talking display. pIf you call up a secret entry to make a call or send mail, the record is not stored in without Permission “Redial”, “Dialed calls”...
  • Page 145 Call Acceptance Information You can receive voice calls, videophone calls, and PushTalk calls only from specified pYou cannot operate the following while “Restrict dialing” is set: phone numbers. You can set only the calls you want to accept to be connected. You can ・Calling up/Referring to phone numbers other than specified specify up to 20 phone numbers.
  • Page 146: Setting Response To Incoming Calls Without Caller Id

    <Call Setting without ID> <Ring Time> Setting Response to Incoming Calls Delaying Start of Ringing Operation without Caller ID mSettingsIncoming callRing time Do the following operations. You can set whether to receive (accept) or not to receive (reject) a voice call, videophone call, and PushTalk call depending on the reason for no caller ID.
  • Page 147: What Is Data Security Service

    <Reject Unknown> What is Data Security Service? Rejecting Incoming Calls from Phone You can back up the Phonebook by auto-updating. Data Security Service Numbers which are not Stored in enables you to save the Phonebook entries, images, and mail messages stored in your FOMA phone to the Data Storage Center and to restore the Phonebooks saved data files even when the FOMA phone is lost or exposed to water.
  • Page 148 Reference Other “Security Settings” If you want Functions/Service name page Other than introduced in this chapter, the following functions/services for To store/check safety information using i-mode i-mode Disaster Message the Security Settings are available: when a disaster occurs Board Service To change the mail address Change Mail Address Reference...
  • Page 149 Camera Before Using Cameras ....... . Shooting Still Images ....<Still Image Shoot> 155 Shooting Moving Images .
  • Page 150 ・If the battery pack is removed off while saving a file to the FOMA phone Before Using Cameras or microSD card, that data becomes contingent. ・You need to obtain a microSD card separately to use the functions Notes for when Shooting Images related to the microSD card.
  • Page 151 ■Keys used for shooting Camera Setting and Finder Display Icon menu operation Brightness On the Finder display, the settings are indicated by bars and icons. Function menu access White balance Bar code reader Photo mode Shutter/Save Image quality Tele Image size Wide Image stabilizer Settings for Focus (when the...
  • Page 152 Icon/bar name Icon Description Page Icon/bar name Icon Description Page  Number of Number of Number of remaining recordable still Number of frames at “Manual” shooting in recordable — images — frames for “Continuous mode” image Up to 999 images are displayed. continuous shooting Memory...
  • Page 153 Icon/bar name Icon Description Page Specifications for Still Image Shooting  Image size 5M (2592 x 1944) File format JPEG (Photo mode/ 3.7M Wide (2592 x 1456) Compression format Baseline format Continuous 3M (2048 x 1536) mode) Pixels Photo: 5M (2592 x 1944), 3.7M Wide (2592 x 1456), 3M (2048 x 1536), 2M Wide (1920 x 1080), 2M Wide (1920 x 1080) 2M (1600 x 1200), Stand-by (480 x 854),...
  • Page 154 Estimate of the number of storable still images Specifications for Moving Image Shooting The number of files that can be saved varies depending on shooting environments. ※The number of files that can be saved to the FOMA phone and microSD card has limit. File format MP4, ASF Coding system...
  • Page 155 Estimate of recordable time The recordable time varies depending on shooting environments. Take reference to the recordable time and memory capacity which appear on the Finder display as well. ■Recordable time to P906i Recordable time per recording (Approx.) Total recordable time (Approx.) File size Image size Movie type set...
  • Page 156 ■Recordable time to microSD card (64 Mbytes) Recordable time per recording (Approx.) Total recordable time (Approx.) File size Image size Movie type set Image quality Image quality setting Super fine Fine Normal Super fine Fine Normal Normal 227 sec 447 sec 14 min 227 sec 447 sec...
  • Page 157: Shooting Still Images

    Press <Still Image Shoot> The still image you shot is saved to the “Camera” folder. Shooting Still Images pTo save the still image as an mirrored image (horizontally reversed), press i( ) and select You can shoot still images by using the camera. The shot still images are “Mirror save”.
  • Page 158 Press To save all still images Continuous shooting starts. )Save or Mirror save When “Continuous mode” is set to “Manual”, press ) the number of times of shooting frames. The Post View display for confirmation appears. The still images you shot are saved to the “Camera” folder. pWhen “Focus”...
  • Page 159 Function menu Operation/Explanation Function Menu of the Post View Display in Continuous Mode Select an item. Attach location pIf you highlight a still image from the Post View display and press ), “ ” is By position loc..Measures the current location and store added.
  • Page 160 Press <Moving Image Shoot> The moving image you shot is saved to the “Camera” Shooting Moving Images folder. pPress r to cancel the shot moving image and return You can shoot moving images by using the camera. The shot moving to the Finder display.
  • Page 161 Information Changing Settings for Shooting Images pIf you do key operations while recording, the operation sound may be picked up. pThe Call/Charging indicator lights during recording. You can set the camera when shooting images. pWhen you switch the subject you are shooting to a subject with a difference in Use Zoom perspective, it takes time to focus on the new subject.
  • Page 162 ■Inside camera Information The maximum pIf “Movie type set” is set to “Voice” in Movie Mode, you cannot use Autofocus. Camera mode Size Level of zoom magnifications p“Face detection” is available only in Photo Mode. (Approx.) pWhen “Face detection” is set, you cannot paste a cushy mark in the image. VGA (640 x 480) 1 level 1.0 times...
  • Page 163 Function menu Operation/Explanation Function menu Operation/Explanation Image quality You can set the image quality for saving. Camera settings You can set a photo mode suitable for the place. Select an image quality. Photo modeSelect a photo mode. (Photo mode) Normal..Standard mode At Camera start-up Camera settings You can adjust to -3 (dark) through +3 (bright).
  • Page 164 Function menu Operation/Explanation Function menu Operation/Explanation Continuous modeSelect a mode. Storage setting You can set the storage location for the still or moving images you Cont. shooting set. (Store in) shot. (Continuous mode) Auto ..Shoots automatically at an interval and with the Store inPhone or microSD [Continuous Mode number of frames as specified by “Shot...
  • Page 165 Information Function menu Operation/Explanation <Img. stabilizer> Icon You can set whether to display icons. pThis function is only for decreasing the degree of camera shake, so its effect differs ON or OFF depending on the subject or condition. pEven if you set the icons not to be displayed, the icon such as pImage Stabilizer might not work effectively in the following cases: “...
  • Page 166: Auto Timer

    ■For “File restricted” Information <Display size> First distribution Secondary distribution pWhen “Image size” is set to a size larger than “HVGA Wide (640 x 352)”, “Fit in display” always applies. pWhen “Image size” is set to “QCIF (176 x 144)” or “Sub-QCIF (128 x 96)”, the image is enlarged two times at both lengthwise and sidewise when it is displayed in “Actual size”.
  • Page 167 <Bar Code Reader> Some QR codes have image or melody information. p“株式会社NTTドコモ (NTT DoCoMo, Inc.)” is displayed when you Using Bar Code Reader scan this QR code with the FOMA phone. You can use the outside camera to scan JAN codes and QR codes and Scan a Code store them as data.
  • Page 168 Press Function menu Operation/Explanation The code is scanned. (The shutter tone does not sound.) Display list You can bring up the Bar Code Reader list when one or more files pTo cancel scanning, press r or are stored. pWhen scanning is completed, the scanning completion tone sounds and the Call/ Internet You can connect to the highlighted URL via i-mode or Full Charging indicator lights.
  • Page 169 Information Function menu Operation/Explanation <Save image> Save image You can save the scanned image data to set to the Stand-by pThe file name and title for the saved image are “imageXXX” (XXX are numerals). display or other displays. Select a destination folder. <Save melody>...
  • Page 170: Scan Text

    Fit the characters to be scanned to the Function menu Operation/Explanation guide frame and press Delete allEnter your Terminal Security CodeYES Delete (Delete all) When the focus is locked, a confirmation tone sounds and the guide frame becomes green. <Text Reader> pPress o to show the reduced display, and press to return to the former display.
  • Page 171 Press Function Menu of the Scanning Text Display/Scanned Text The scanned characters are set. Confirmation Display pTo link characters, repeat step 2 through step 6. pTo release the set characters, press r. Function menu Operation/Explanation )Store Store See page 169. The scanned characters are stored.
  • Page 172 Function Menu of the Scanned Text Result Display/Text Reader List Function menu Operation/Explanation Edit the text. Edit Internet See page 166. Compose message You can compose an i-mode mail message to send to the scanned mail address as a destination address. Go to step 3 on page 198.
  • Page 173 i-mode/i-motion/i-Channel What is i-mode? ........172 Using Certificates Operating SSL Certificates .
  • Page 174: Accessing Sites

    iiMenu What is i-mode? While you are online, “ ” i-mode is the service that makes use of the display of the FOMA phone blinks. p“ supporting i-mode (i-mode phone) to enable you to use online services ” blinks while you are using the i-mode service such as site (program) access, Internet access, and i-mode mail.
  • Page 175 To return to a non-SSL site Information pThe iMenu in English differs slightly from the iMenu in Japanese. The display on the right appears. Select “YES” to display the pItems such as Tokusuru Menu and News are not shown on the English iMenu. ordinary site;...
  • Page 176 To turn pages Name Display example Operation/Explanation Text box You can enter characters. Highlight a text box and You can move back up through the pages that you have displayed so far by pressing press ) to show the Character Entry o repeatedly.
  • Page 177 Information Function menu Operation/Explanation pEffect tones sound for some Flash movies. To silence them, set “Sound effect setting” Bookmark Bookmark (or “Sound effect”) to “OFF”. (Bookmark) Go to step 1 on page 179. pThe effect tone and vibrator for the Flash movie set for the Stand-by display do not Screen memo See page 180.
  • Page 178 Information Function menu Operation/Explanation <Others (Title)> Others When characters are not correctly displayed, you can convert pUp to 128 half-pitch/64 full-pitch characters can be displayed for a title. (Change CHR code) them to the correct ones. Change CHR code <Last URL> pThis setting is valid only for the site and Internet web page being Displaying Most Recently Accessed Site displayed.
  • Page 179: Using My Menu

    <My Menu> <Change i-mode Password> Using My Menu Changing i-mode Password If you register frequently used sites in My Menu, you will be able to The i-mode password (four digits) is required to subscribe to and access them easily. unsubscribe from message services and i-mode pay sites, and to do You can register up to 45 sites.
  • Page 180: Quick Access

    <Enter URL> Function Menu of the URL History List Displaying Internet Web Pages Function menu Operation/Explanation Compose message You can compose an i-mode mail message with the highlighted iGo to location<NEW> URL pasted to the text. Go to step 2 on page 198. pYou can compose it also by pressing l( Enter a URLOK Add desktop icon...
  • Page 181 Function menu Operation/Explanation Information pURLs containing up to 256 half-pitch characters can be registered (up to 512 transmission See page 371. half-pitch characters for Full Browser). URLs longer than this cannot be registered. (Send all Ir data) pUp to 12 full-pitch/24 half-pitch characters are stored for a title. For longer titles, the transmission See page 372.
  • Page 182 Function menu Operation/Explanation <Screen Memo> Copy You can copy the URL of the bookmark. Saving Site Contents Select a start point for copying (Copy URL) Select an end point for copying. Save as a Screen Memo pSee page 442 for how to paste copied characters. You can save a displayed page as a screen memo to the FOMA phone.
  • Page 183 Function menu Operation/Explanation Display a Screen Memo Delete all You can delete all screen memos. The folders will not be deleted. iScreen memo Enter your Terminal Security CodeYES Function Menu of the Screen Memo List Screen Memo Function menu Operation/Explanation Folder list Move See page 179.
  • Page 184 YESSelect a destination folder. Function menu Operation/Explanation pSee page 186 when images are stored to the maximum. Add to phonebook See page 96. Others You can display the URL of the screen memo. To set it as a display, select “YES”. URL (URL) Go to “Set display”...
  • Page 185: Download Melody

    Download Melody Download PDF File You can download melodies and set them as a ring tone and other tones. You can download PDF files from sites for display. You can save up to You can save up to 3,500 files in total sharing the memory space with 3,500 files in total sharing the memory space with other data files, other data files, however, the number of files you can save decreases however, the number of files you can save decreases depending on the...
  • Page 186 Download Kisekae Tool File Download ToruCa File You can download Kisekae Tool files from the site to change the ring You can download ToruCa files from sites. You can save up to 495 files, tone, Stand-by display, icons, and others at a time. You can save up to however, the number of files you can save decreases depending on the 3,500 files in total sharing the memory space with other data files, data volume because the memory space is shared with other data files.
  • Page 187: Download Dictionary

    Information Download Dictionary pWhen no decoration is set for the template, you cannot save it. You can download dictionaries from sites. You can save up to 10 pWhen a file is attached to the template, that file is deleted. dictionaries including the pre-installed ones. pWhen the image whose output from the FOMA phone is prohibited is inserted, the pYou can download the pre-installed dictionaries from the “P-SQUARE”...
  • Page 188 pFor programs, you need to delete many files when deleting other files because the data Information volume per program is large. pYou can save up to 100 Kbytes per Chara-den image. pIf the maximum number of programs are stored when you execute “Move program” or try to save an i-αppli program or ToruCa file, you need to delete at least one file which Search by i-mode belongs to the same type.
  • Page 189 Operations from Highlighted Information Mail To Function You can send mail by using mail addresses or similar information You can easily make a call, send mail, display Internet web pages, start displayed on sites and in mail. 1Seg, book programs, and set timer recordings using highlighted information (phone numbers, mail addresses, URLs, melodies, images, Select a mail address or similar information.
  • Page 190: Address Link Function

    Media To Function <i-mode Settings> Setting i-mode You can start 1Seg, book programs, or set timer recordings from the information (links) displayed on sites and in mail. ii-mode settingsDo the following operations. Select 1Seg informationYES 1Seg or the program booking/timer recording starts. pWhen the program booking/timer recording function starts, press l( ) to Item...
  • Page 191 Information <Host Selection> <Set image display> Changing a Host from i-mode pEven when “ON” is set, images might not be displayed correctly. In this case, “ ” is (ISP Connection Communication) displayed. pWhen “OFF” is set, “ ” is displayed and the data file is not received. pIf you change this setting, “Set image display”...
  • Page 192 Information <Client Certificate> pIf you set any other host than i-mode, “Pake-Houdai” or “Pake-Houdai Full” are not Setting FirstPass applied. User certificates verify that you have subscribed to the FOMA service. <SSL Certificate> Downloaded user certificates are stored on the UIM for the use on Operating SSL Certificates FirstPass sites.
  • Page 193 Enter your PIN2 code. Access FirstPass Center pEnter your PIN2 code within 60 seconds. When the You can perform user certificate operations on the site of the FirstPass code is not entered within 60 seconds, the connection is Center site. cut off as an error entry.
  • Page 194 Enter your Terminal Security Code Request Revocation of User Certificate Do the following operations. You can revoke the downloaded user certificate. Item Operation/Explanation Site display of the FirstPass CenterOther settings Revoke your certificateYESEnter your PIN2 code. Enter a default URL. Default URL pYou can enter up to 100 half-pitch alphanumeric characters.
  • Page 195 What is i-motion? <Obtain i-motion Movie> Obtaining i-motion Movies from Sites i-motion movies are composed of video, sound and music, and you can play them back obtaining from i-motion compatible sites into your FOMA Play Back an i-motion Movie Obtained from a Site phone.
  • Page 196 Information <imotion Auto-play> pDepending on the line speed, line state, or radio wave conditions, the playback during Setting Automatic Replay of i-motion obtaining might be suspended or the images might be distorted. You can repeatedly play back the standard (normal) type of i-motion movies after obtaining, but cannot Movies play back the streaming type of i-motion movies.
  • Page 197 What is i-Channel? Using i-Channel i-Channel is a service that news, weather forecast and others are When “Ticker ON/OFF” is set to “ON”, up to 10 ticker files for the latest distributed to i-Channel mobile phones as graphical information. information flow repeatedly on the Stand-by display. If you want to know Information is periodically received and tickers flow on the Stand-by more about the information, you can obtain the details from the Channel display for the latest information.
  • Page 198 Information Information pDepending on your usage state, you might receive information from i-Channel when <Reset i-Channel> pTickers are not displayed after you execute “Reset i-Channel”. When the information you display the Channel list. o to receive the latest is automatically updated after that or when you press Setting How Ticker is Displayed information, tickers automatically flow.
  • Page 199 Mail What is i-mode Mail? ........198 Setting Mail Settings Sorting Mail Automatically to Each Folder .
  • Page 200 Select the address fieldSelect an item. What is i-mode Mail? Phonebook..Call up a Phonebook entry and select a phone number or Once you subscribe to i-mode, you can exchange e-mails over the mail address.
  • Page 201 Information pThe mail message you entered a Deco-mail pictogram becomes a Deco-mail message. Information pIn B Mode of 2in1, you cannot compose i-mode mail. pDepending on the radio wave conditions, the characters might not be displayed correctly at the destination. Function Menu of the Message Composition Display pIf you send an i-mode mail message to other carrier’s mobile phone with a pictograph entered, the pictograph is automatically converted into a similar pictograph at the...

Table of Contents

Save PDF