NTT docomo FOMA D703i User Manual page 297

Switching functions to operate
Pressing b while you are using multiple functions,
the Switch Task menu appears, which allows you to
switch screens and perform your desired operation.
Example
Switching to the mail composition
screen during a voice call
b during a voice call
1
Compose message
To return to the talking screen: b
･
Phone from the Switch Task menu
You can start a new function by pressing m
･
in the Switch Task menu to display the New Task
menu. Press m again to return to the Switch
Task menu.
INFORMATION
The item names displayed in the Switch Task menu may
●
differ from the menu item names, etc.
Quitting all running operations
You can quit all functions running in Multitask at a time.
bp during Multitask
1
Turning power on/off automatically at the
specified time
Default ● Auto power ON: OFF
● Auto power OFF: OFF
Example
Setting Auto Power ON
m8612
1
■ Setting Auto Power OFF:
m8613
2
Select each item to set
Auto power ON：
Set or cancel Auto Power ON.
z
Select
Switch Task menu
z
Select
z
Select Yes
Auto Power ON/OFF
z Press p
Time：
Set the time to automatically turn the power
on.
･
Enter the time in the 24-hour clock. For
single-digit hours or minutes, precede the
digit with 0.
Repeat：
Set Auto Power ON to repeat.
INFORMATION
Even if Auto Power OFF is set to ON, when the specified
●
time arrives while FOMA terminal is in any mode except
standby, the power is not turned off. The power is turned
off after the running function completes each job.
However, if the specified time arrives while the terminal
security code entry screen is displayed following the
standby display or the PIN1 code or PIN2 code entry
screen is displayed when FOMA terminal is turned on,
the power is turned off.
Set Auto Power ON to OFF in areas where mobile phone
●
use is prohibited, such as in hospitals, medical facilities
and airplanes.
Alerting with alarms after the specified
time period has passed
1 Enter time period
The countdown screen of the timer appears and
countdown starts.
･
Enter the period from 1 to 60 minutes. For 1 to
9 minutes, do not enter the preceding 0.
Countdown continues even if a call or b is
･
pressed to start another function during
countdown.
If you press c or f during countdown, a
･
confirmation screen appears asking whether to
stop countdown. Countdown continues even
while the confirmation screen is displayed.
After the specified time has passed
1 The alarm sounds
Other Convenient Functions
Timer
z r or m1
アラーム・メ
The alarm (
ロディ
(Alarm, melody))
sounds at the volume set
for the call alert volume,
and the keys flash.
If the vibrator is set for
incoming calls in Vibrator
Setting, it operates
according to the setting.
295
Next