Press m2 on the mail composition
1
screen
The mail is saved as auto-send mail in the Unsent
messages folder of Unsent messages and
appears at the top of the screen.
Inside the service area
Auto-send mail is sent automatically.
auto-send mail is being sent and
all the auto-send mails are sent.
・
When sending fails, the auto-send failure mail
remains in Unsent messages and
When there are no failure mail by deleting,
canceling the auto-send setting or exchanging the
UIM,
disappears.
INFORMATION
Auto-send mail is not sent automatically while editing the
●
signature.
Once auto-send mail fails to be sent, it is not sent
●
automatically inside the service area next time. However,
when sending is failed due to outside the service area,
mail is resend up to twice.
Canceling the auto-send setting for auto-send
mail/failure mail
1
Highlight the auto-send mail or failure mail
in the unsent mail list
Yes
INFORMATION
The auto-send setting is also canceled if an auto-send
●
mail is selected in the unsent mail list.
If you highlight a failure mail in the unsent mail list, press
●
m and select Display → Display failed msg, the cause
of the error is displayed. Pressing o cancels the auto-
send setting.
・
In case a message indicating that sending to the
broadcast addresses has failed appears as the cause of
the error, you can display the broadcast address by
pressing o. Pressing o cancels the auto-send setting.
The auto-send setting for auto-send mail/failure mail is
●
also canceled in the following cases:
・
When the mail is moved to the folder for the Message
i-
ppli
α
・
When exchanging the UIM
・
When Host number or Host address is changed in Host
Selection.
198
Mail
flashes while
disappears after
flashes.
z
p
z
Select
Editing and sending unsent/sent i-mode Mail
Example
Editing the unsent mail
a4
z
1
Select a folder
・
is indicated for SMS.
To edit and send the sent mail: a5
・
Select a folder
2
Select a mail
・
To edit the sent mail again: Highlight a mail
p
z
Press p
3
Edit the mail
INFORMATION
You can also edit mail by pressing p on the sent mail
●
view screen.
Composing mail quickly
You can compose i-mode Mail and SMS easily to
the parties saved to the phonebook No. 0 to 99 in
the FOMA terminal phonebook.
・
The first mail address registered in the
phonebook entry is set as the address of i-mode
Mail and the first phone number as the address of
SMS.
Example
Sending i-mode Mail to the party of
phonebook No. 23
1
Enter the phonebook No. (23 in this
z
Press a
case)
・
Enter the phonebook No. without prefix 0.
Composing and sending i-mode Mail ☛P189
・
■
Composing SMS: Enter the phonebook
z
a (for over a second)
No.
Composing and sending SMS ☛P224
・
Menu 14 / Menu 15
z
z
Quick Mail