NTT docomo FOMA D703i User Manual page 431

Command
AT ＊ DGPIR = n
Specifies whether to notify the caller ID for packet communication. This specification is effective both
for incoming and outgoing calls.
n = 0: The APN is used as it is when a packet communication is established. (default)
n = 1: Adds "184" to the APN when a packet communication is established.
n = 2: Adds "186" to the APN when a packet communication is established.
ex. Enter
AT ＊ DRPW Shows the level of power reception in the format of " ＊ DRPW:m", where the value of m ranges from 0
to 75.
ex. Enter
+++ Changes FOMA terminal mode from the online data to the online command. The duration of escape
guard is fixed to 1 sec.
ex. Enter
Shows a disconnection reason of the previous communication. ☛P29
AT + CEER
ex. Enter
Specifies the APN for packet communication. ☛P29
AT + CGDCONT
AT + CGEQMIN
Specifies the criteria for judging whether to approve the QoS (Quality of Service) level provisioned by
the network when the packet communication is established. ☛P29
AT + CGEQREQ
Specifies the QoS level requested to the network when transmission is performed during packet
communication. ☛P30
AT + CGMR
Shows the version of your FOMA terminal with a 16-digit number.
ex. Enter
AT + CGREG = [n]
Determines whether to notify the network registration state. Either "inside the service area" or "outside
the service area" is notified.
n = 0: Not notified. (default and when parameter omitted)
n = 1: Notified in the format of " + CGREG:n,stat".
*1, *2 ex. Enter
AT + CGSN
Shows the manufacturer's serial number of FOMA terminal.
ex. Enter
AT + CLIP = [n]
Specifies whether to show the caller ID of an incoming 64K data communication on the PC's screen.
n = 0: Does not show the information. (default and when parameter omitted)
n = 1: Shows the information.
If you enter "AT + CLIP?", it shows " + CLIP:n,m".
*1, *2 ex. Enter
AT + CLIR = [n]
Specifies whether to show your caller ID to the other party when you originate a 64K data
communication.
n = 0: In accordance with the service agreement. (when parameter omitted) n = 1: Does not notify the
n = 2: Notifies the caller ID. (default)
If you enter "AT + CLIR?", it shows " + CLIR:n,m".
ex. Enter
Specifies the error report format of FOMA terminal. ☛P29
AT + CMEE = [n]
n = 0: Shows "ERROR". (default and when parameter omitted)
n = 1: Shows in the format of " + CME ERROR:xxxx". (xxxx=numbers)
n = 2: Shows in the format of " + CME ERROR:xxxx". (xxxx=characters)
*1, *2 ex. Enter
AT + CNUM
Shows the Own Number data of FOMA terminal in the format of " + CNUM:, "number",type".
number: Phone number
ex. Enter
AT + CR = [n]
Specifies whether to display the communication type (packet communication or 64K data
communication) before CONNECT is displayed, during line connection.
n = 0: Does not show the information. (default and when parameter omitted)
n = 1: Shows the information in the format of " + CR:serv".
*1, *2 ex. Enter
AT ＊ DGPIR = 0
AT ＊ DRPW
+++
AT + CEER
AT + CGMR
stat = 0: Outside the service area stat=1: Inside the service area (home) stat=4: Unknown
stat = 5: Inside the service area (visitor)
AT + CGREG = 1
AT + CGSN
m = 0: The network setting that does not show caller ID to the other party when originating a call.
m = 1: The network setting that shows caller ID to the other party when originating a call.
m = 2: Unknown
AT + CLIP = 0
caller ID.
m = 0: CLIR is not activated. (caller ID always notified) m=1: CLIR is activated. (caller ID always not
notified)
m = 2: Unknown m=3: CLIR temporary mode (default for "not notified")
m = 4: CLIR temporary mode. (default for "notified")
AT + CLIR = 0
AT + CMEE = 0
type = 129: Does not show " + 81". type = 145: Shows " + 81".
AT + CNUM
serv=SYNC: 64K data communication serv=GPRS: Packet communication
AT + CR = 0
Description & Parameter
Display AT ＊ DGPIR?
Display None
Display None
Display None
Display None
AT + CGREG?
Display
Display None
AT + CLIP?
Display
AT + CLIR?
Display
AT + CMEE?
Display
Display None
AT + CR?
Display
26
AT ＊ DGPIR = ?
Test
AT ＊ DRPW = ?
Test
Test None
AT + CEER = ?
Test
AT + CGMR = ?
Test
AT + CGREG = ?
Test
AT + CGSN = ?
Test
AT + CLIP = ?
Test
AT + CLIR = ?
Test
AT + CMEE = ?
Test
AT + CNUM = ?
Test
AT + CR = ?
Test
Next