NTT docomo FOMA D703i User Manual page 86

3
Select each item to set
Name and reading
：Check the name.
Name
：Check the reading.
Reading
Group ：Select a group from Group 1 to 10 and
Phone number：Enter the phone number including the area code. You can enter up to 26 digits (up to
Mail address ：Up to 50 one-byte characters can be entered.
Setting group names and incoming/outgoing actions
You can change the group name of the FOMA terminal phonebook or UIM phonebook and set the ring
alert by group in the FOMA terminal phonebook.
･
グループなし
As for
Creating groups or edit the name of the groups
･
グループなし
Other than
m412
1
To change the UIM phonebook group names: m412p
･
m2 z
2
Enter the group name
･
You can enter up to 20 one-byte or 10 two-byte characters for group names in the FOMA terminal
phonebook.
･
You can enter up to 21 one-byte or 10 two-byte characters for group names in the UIM phonebook. Note
that when both one- and two-byte characters or one-byte katakana are used, up to 10 characters can be
registered.
■ Changing the name of the group：Highlight a group
･
For UIM phonebook: Highlight the group
Changing the order of groups of the FOMA terminal phonebook: m
■
84 Phonebook
z Press p
■
Correcting the name: Select the name field
■ Correcting the reading: Select the reading field
25 one-byte or 12 two-byte characters)
･
Two-byte katakana and one-byte alphanumeric characters can be used to enter
the reading.
･
When both one- and two-byte characters are used, up to 12 characters can be
registered.
･
If you correct the name, the changes will not be automatically reflected to the
reading of the name.
20 digits depending on the UIM type).
･
Pause (P), "＋", "＃" and sub-address delimiter (
(T) can be entered but cannot be registered.
, the group name cannot be changed or the incoming/outgoing action cannot be set.
, up to 30 groups can be registered in the FOMA terminal phonebook.
z
グループなし
z m4
z m2 z
Edit the name of group
z p
Correct the name
z
Correct the reading (up to
グループなし
. is set by default.
) can be registered. Timed pause
Group Setting
z
Edit the name of the group
z 6 or 7