NTT docomo FOMA D703i User Manual page 310

Recording your own voice during standby
Press C3
1
After about 3 seconds, a beep is heard and the
recording starts.
･
When the remaining time becomes 5 seconds,
rapid beeps are heard to warn that the end of
recording is approaching. A long beep is heard
at the end of the recording. This beep is not
recorded.
To cancel recording: o, f, or c
･
Playing voice memos
C4
1
The voice memo list shows both talking and
standby voice memos.
a
b
a
Status icon
：Talking memo
No icon：Standby voice memo
b
Talking voice memo during an
international call
c
Phone number/Name (when registering
phone number in the phone book)
Reason for no caller ID/Standby voice
memo
d
Date and time recorded of a voice memo
highlighted, pone number/Reason for no
caller ID
e
The name of multi-number (when making an
application for the Multi Number service)
2 Select a voice memo
An indication of the
elapsed playing time
308 Other Convenient Functions
Menu 463
Menu 464
c
d
e
The voice memo is
played.
To stop playback: o
･
･
To adjust the
volume: %
･
To switch between on
and off of
speakerphone: n
3
Select Yes or No
･
When you select Yes, the voice memo you have
heard is deleted.
■ Deleting a voice memo from the voice
memo list: Highlight the voice memo
m21 z
To delete all: m22
･
■
Registering phone number in the
phonebook from the voice memo list:
a Highlight the talking voice memo to
z m4
save
･
To add the number to the existing
phonebook data: Highlight the talking
voice memo to save
b 1 or 2 z
address ☛P81, P83
･
To add the data to the existing
phonebook data: 1 or 2
z
Edit phonebook data ☛P91
a party
INFORMATION
Maintain the contents of voice/video memos in some
●
other form. Recorded data may be lost due to failure,
repair, change to new model or other handlings of FOMA
terminal. If the data should be erased, DoCoMo assumes
no responsibility for the loss of any data.
You can make calls by using talking voice memos.
●
Highlight a party in the voice memo list and press n to
make a voice call and t to make a videophone call.
Checking the call duration and the call
cost
The call duration and the call cost of the last and
total of voice/videophone call can be checked.
･
The duration includes the voice call, videophone
call and 64K data communication, and the both of
incoming and outgoing are counted for each.
･
The call cost data is counted only for outgoing.
However, when calling the toll-free party or the
directory assistance service (104), "0 YEN" or
＊＊＊＊＊＊
" YEN" is displayed.
･
The call cost is stored in the UIM, so stored total
cost is displayed (starting from December 2004)
when using the current UIM to FOMA terminal
you newly purchased.
･
For FOMA terminals released before 901i
series, call cost data is stored in the UIM, but
cannot be displayed.
･
The displayed call duration and call cost can be
reset.
z
Select Yes
z
Select Yes
z m5
Save the name and mail
z
Select
Call Duration/Call Cost