NTT docomo FOMA D703i User Manual page 340

To switch upper slot/lower slot: t
･
To fix the characters as hiragana: m
･
New characters can be added. To exit the
character entry, go to Step 4.
･
On the entry screen for mail message, slot
input board appears if you enter 1 to 9,
0 or (.
p
2
The characters are converted.
･
Characters are converted in the same way as
in 5-touch Input Method.
･
To return converted characters to the state they
had before conversion and continue entering
characters, press c
o
3
The characters are fixed.
･
New characters can be added.
a z Press o
4
Character entry is exited.
･
You can also perform the same operation by
pressing m and selecting Exit.
Setting input method
Default Input method: 5-touch Input prediction: ON
Auto cursor: Normal
m8625
1
2
Select each item to set
.
Input method：
Specifies 5-touch or Slot.
･
When Slot is set, items below are disabled.
Input prediction：
Specifies whether to display predictive
conversion options.
Auto cursor：
Sets the time period before the cursor
automatically moves to the right.
･
Setting Slow moves the cursor in about
1.5 seconds.
･
Setting Normal moves the cursor in
about 1 second.
･
Setting Fast moves the cursor in about
0.5 seconds.
338 Character Entry
Input Method Setting
z Press p
Changing the setting during character entry
･
The changes cannot be made before characters
are fixed or on the Deco-mail decoration selection
screen.
･
Only the automatic cursor function can be
changed during in-line entry.
m on the character entry screen
1
Select Set input method
Press any of 1 to 3
2
･
To switch between Use 5-touch/Use Kana input
and Use Slot input: 1
･
To switch between Prediction ON and Prediction
OFF: 2
･
To set the time period before the cursor
automatically moves: 3
z
z 1 to 4