NTT docomo FOMA D703i User Manual page 436

■ Communication protocol result code
No. Text display
1 PPPoverUD Connected via 64K data
communication
2 AV32K AV (videophone) connected via
[32K]
3 AV64K AV (videophone) connected via
[64K]
5 PACKET Connected with packet
communication
■ Display example of result codes
When "ATX 0" is set
Regardless of the settings of the AT￥V command
(☛P28), only CONNECT is displayed upon
completion of connection.
Text display example:
ATD ＊ 99 ＊＊＊ 3#
CONNECT ("1" in numeric display)
When "ATX 1" is set
･
When "ATX1", "AT￥V0" is set (default)
Upon completion of connection, the result code
is displayed in the following format: CONNECT
<speed between FOMA terminal and PC>
Text display example:
ATD ＊ 99 ＊＊＊ 3#
CONNECT 460800 ("1 21" in numeric
display)
･
When "ATX1", "AT￥V1" is set*
The code is displayed upon completion of
connection as follows:
Text display example:
ATD ＊ 99 ＊＊＊ 3#
CONNECT 460800 PACKET mopera.net/
64/384 ("1 21 5" in numeric display)
Indicates that speed between FOMA terminal
and PC is 460,800 bps and the terminal is
connected to mopera.net providing a maximum
upload speed of 64 kbps and a maximum
download speed of 384 kbps.
*1 When "ATX1" and "AT￥V1" are set at the
same time, it is likely that dialup connection
will fail.
It is recommended that this function be
usually set to default, which is "ATX1" and
"AT￥V0".
Meaning
1
31