NTT docomo FOMA D703i User Manual page 411

3 Double-click each device type
the name of the installed device
Check that all the device names described in the
following list are shown.
Device type
USB (Universal Serial
Bus) Controller
Port (COM and LPT)
Modem
*1 "x" of COMx varies by PC to be used.
Uninstalling the communication configuration file
Before operation, read "Before installation/
uninstallation". ☛P3
Before uninstalling, make sure that FOMA terminal is
removed from the PC.
Example
For Windows XP
1 スタート
Click
プログラムの追加と削除
and
Programs)
プログラムの追加と削除
The
■
For Windows 2000:
a Click
スタート
ネル
b Double-click
削除
(Add/delete applications)
Select FOMA D703i USB
2
削除
(Update/delete)
3 Check the name of program and click
The communication configuration file is
uninstalled.
Click OK
4
INFORMATION
● When the installation fails or FOMA D703i USB is not
displayed on the screen of
insert the attached CD-ROM into the PC and on the
FOMA D703i CD-ROM screen, click
ト・各種設定ソフト
(Datalink software, configuration
インストール
software) and
(
信設定ファイル ドライバ
configuration file (driver)) and uninstall the
communication configuration file.
z
Check
Device name
FOMA D703i
･
FOMA D703i
Command Port (COMx)*
･
FOMA D703i OBEX Port
(COMx)*
1
FOMA D703i
コントロールパネル
,
(Add/delete
screen appears.
設定 コントロールパ
, and
アプリケーションの追加と
z
Click 変更と
プログラムの追加と削除
データリンクソフ
(Installation) of D703i
)(D703i communication
Communicating using the FOMA PC
configuration software
A number of settings are required when FOMA
terminal is connected to a PC to perform packet
communication or 64K data communication. The
FOMA PC configuration software allows you to
easily perform the following settings:
1
■ Easy setup
Creating a dialup connection for FOMA data
communication and W-TCP setup can be
performed automatically by following the
instructions in the guide.
■ W-TCP setup
Optimize the settings in the PC before performing
FOMA packet communication. Optimization of the
communication settings using W-TCP setup is
required to enable communication capability to
maximum extent.
■ Dialup connection (APN) setup
Perform the dialup connection (APN) setup
required for packet communication.
Unlike 64K data communication, phone numbers
cannot be used as a dialup connection for FOMA
packet communication. Set a dialup connection name
called APN in FOMA terminal for each dialup
connection in advance, and enter the registration
number (cid) in the phone number field of dialup
connection. By default, "mopera.ne.jp" (APN) is
registered in cid 1 to connect to mopera, and
"mopera.net" (APN) for cid 3 to connect to mopera U,
but the APN for connections to other providers and in-
house LAN must be set.
Installing the FOMA PC configuration software
はい ･
Uninstall an old version of the FOMA PC
configuration software, if already installed, before
installing the FOMA PC configuration software
(version 3.01). You can display the version from
メニュー
(Menu) →
information) of the FOMA PC configuration software.
･
If the following software (provided with the FOMA
terminal released before this model) are installed,
uninstall them in advance:
,
･
W-TCP environment configuration software
･
FOMA data communication configuration
software
通
･
Uninstall the FOMA PC configuration software in
advance before reinstalling the FOMA PC
configuration software.
･
Before operation, read "Before installation/
uninstallation" ☛P3
6
バージョン情報
(Version
Next