NTT docomo FOMA D703i User Manual page 156

Brightness
: +2 : +1
: -1 : -2
･
If you change the level, it may not give much effect
depending on the object.
･
Unavailable when the scene mode/effect is set to
Whiten or Suntan.
Color density
: +2 : +1
: -1 : -2
･
If you change the level, it may not give much effect
depending on the object.
･
Unavailable when the scene mode/effect is set to
Whiten, Suntan, Mono tone (red), Mono tone (green),
Mono tone (blue), Monochrome or Sepia.
White balance
Natural color tone coordinated with the light source is
provided for shooting.
Auto ：
Adjusts white balance automatically.
Sunlight ：
Sets when shooting outdoor in fine weather.
Cloudy ：
Sets when shooting in cloudy weather, shade or
evening.
Fluorescent light ：
Sets when shooting under illumination such as a
fluorescent lamp.
Bulb light ：
Sets when shooting under illumination such as an
electric bulb.
･
Unavailable when the scene mode/effect is set to
Scenery, Twilight, Surf&Snow, Whiten, Suntan, Mono
tone (red), Mono tone (green), Mono tone (blue),
Monochrome, or Sepia.
Shake reduction
Set whether to use the shake reduction function
during video recording.
･
You cannot use during still image shooting.
Auto ：
Shake reduction is automatically activated when
the settings and conditions for shooting are likely
to cause camera shake.
OFF ：
Shake reduction is disabled.
154 Camera
±
: 0
±
:
0
INFORMATION
Camera shake may not be corrected in the following
●
cases:
･
When camera shake is too much
･
When the object is moving
･
When shooting with zoom
Even in other cases, note that camera shake may not be
corrected, depending on the object or shooting situation.
When you record video using the shake reduction
●
function, the angle of coverage becomes narrower as
compared with the case where shake reduction is
disabled.
If you use the shake reduction function with the flicker
●
adjustment being set to Auto, flickering may not be
adjusted sufficiently. It is recommended that you change
the flicker adjustment setting according to the local
power supply frequency.
Frames
You can select frames saved in FOMA terminal or
frame images downloaded from sites.
: Frame is set
･
The frames registered in FOMA terminal by default
are applicable to image sizes of 176 x 144 (QCIF)
and 240 x 320 (standby). ☛P349
･
Frames cannot be set when 96 x 72 (phonebook),
640 x 480 (H-VGA), 480 x 640 (V-VGA) or 960 x 1280
(SXGA) for image size of still image, or 320 x 240
(QVGA) for image size of video is set.
INFORMATION
You can also select frames from the list by pressing
●
m31 on the still image shooting screen or video
recording screen.
If you select a frame that is opposite in horizontal and
●
vertical values to the image size, the frame is displayed
after rotating 90 degrees clockwise; for example,
suppose that you have selected a 144 x 176 frame when
the image size is 176 x 144 (QCIF). In this case, the
frame rotates 180 degrees by pressing m33 on
the still image shooting screen or video recording screen.
Note that your frame cannot be rotated if it is the same as
the image size in terms of horizontal and vertical values.
If the frame downloaded from a site during shooting is
●
not displayed, press m34 on the still image
shooting screen or video recording screen.
Quality
Set the quality of still image or video to shoot.
■ During still image shooting
Fine ：
Provides the highest quality. The file size is
enlarged.
: Frame is canceled