When Message R/F Is Received; Receive Message R/F - NTT docomo FOMA D703i User Manual

Setting the display lighting for use during site
display
You can set the lighting for a site, screen memo, etc.
･
This setting is also reflected to i-mode session of
Display light time in Display Light Setting. ☛P116
Default Terminal setting
d83 z
1
Terminal setting：
The display light conforms to the setting of
Normal use of Display light time in Display
Light Setting.
Always ON：
The display always lights up.
INFORMATION
On the site screen or screen memo view screen, press
●
m and select Display → Set lighting.
Using Message Service

When Message R/F is received

･
The received Message R is saved in Message R and
the received Message F is saved in Message F.
･
The maximum number of items that can be saved
☛P381
1
A Message R/F is received
Receiving screen
Reception completed
Reception result screen
174 i-mode/i-motion/i-channel
Menu 283
Display Light
Press 1 or 2

Receive Message R/F

Flashing
(blue): Unread Message
R exists.
(green): Unread Message
F exists.
Reception result scrolls.
Number of received
Message R/Fs:
When reception fails, "×" is
indicated after Message R or
Message F. To receive
unreceived messages,
perform Check i-mode
Message.
and or flash and Receiving messages... is
displayed.
When reception is completed, the Message R/F
ring alert sounds, the keys light/flash, and the
reception result screen is displayed.
Press o on the receiving screen to stop
･
reception.
2 or 3 z
2
･
When a melody is attached, it plays
automatically. Auto play can be turned off.
☛P219
However, when a Message R/F is displayed
automatically, it does not play.
Viewing the Message R/F screen ☛P175
･
INFORMATION
The reception result screen is displayed for about 15
●
seconds if you do not press any key or until the ring alert
stops if ring time is set to 15 seconds or longer in
Message Alert. When Auto-display is set, the contents of
received Message R/F are displayed before the display
returns to the previously displayed screen. To return to
the previous screen quickly, press c.
When the memory is not enough or the maximum
●
number of saved items is exceeded, the received
Message R/Fs except unread ones will be overwritten,
oldest first. Note that you need to protect Message R/F
you want to keep. ☛P176
･
If the messages cannot be overwritten because the
memory is full with unread Message R/F and protected
Message R/F, Message R/F reception is stopped.
(red) or (red) is indicated on the screen. To receive
new messages, display unread Message R/Fs
(☛P175), delete unnecessary Message R/Fs (☛P176)
or cancel message protection (☛P176) beforehand.
Incoming Message R/F is stored in the i-mode Center in
●
the following cases:
･
The power is off
･
In Self Mode
･
When reception fails
･
While being out of service area
･
While receiving SMS
･
During infrared communication
･
While connecting to the Data Center
･
While Omakase Lock is on
･
While connecting to the FirstPass center
･
When the memory is full with unread Message R/F and
protected Message R/F
Message R/F received by FOMA terminal is saved to
●
FOMA terminal and the Message R/F stored in the
i-mode Center is deleted.
If there are unreceived Message R/Fs in the i-mode
●
Center, , or is indicated. However, the icon
may not be indicated even when there are Message R/Fs
in the i-mode Center. When the maximum number of
Message R/Fs that can be stored in the i-mode Center is
reached, the icon changes to
Select a Message R/F
･
During a videophone call
, or .