NTT docomo FOMA D703i User Manual page 311

･
The displayed call duration and call cost are
estimates and may be different from the actual.
Note that the call cost does not include
consumption tax.
Checking the call duration
Press m8661
1
･
If the total duration of calls was reset in the
past, the duration of the total calls made up to
the present after the reset is displayed.
Last call：
The duration of the last voice/videophone
call or of the last data communication
Total voice calls：
The total duration of voice calls made
Total videophone calls：
The total duration of videophone calls made
Total data sessions：
The total duration of data communication
established
Reset:day&time(Voice)：
The last date and time when Total voice calls
was reset
Reset:day&time(VP)：
The last date and time when Total
videophone calls was reset
Reset:day&time(Data)：
The last date and time when Total data
sessions was reset
■ Resetting the total calls duration:
a p on the call duration screen
Enter the terminal security code
b 1 to 4 z
To return to the call duration screen: p
･
Checking the call cost
Press m86621
1
･
If the total cost of calls was reset in the past,
the cost of the total calls made up to the
present after the reset is displayed.
Last call cost: Voice：
The cost of the last voice call
Last call cost: VP：
The cost of the last videophone call
Last call cost: Data：
The cost of the last data communication
Total calls cost：
The total cost of voice/videophone call and
data communication
Reset: day & time：
The last date and time when Total calls cost
was reset
z
Select Yes
Resetting the total call cost: p on the
■
call cost screen
Select Yes
INFORMATION
The fee for sending Chaku-moji is not included.
●
No last charge information appears as "＊＊＊＊＊＊ YEN".
●
When you switch between the voice and videophone
●
calls during a call, the last call cost shows the total
amount of each call respectively. During the operation to
switch, no call cost is required.
When the last or total duration of voice/videophone call
●
or data communication exceeds 9,999 hours 59 minutes
59 seconds, counting is restarted from 0 second.
When FOMA terminal is turned off, the last call duration is
●
stored, but the last call cost is displayed as "＊＊＊＊＊＊ YEN".
The duration of receiving a call and ringing time are not
●
counted.
The call duration and call cost is not counted for i-mode
●
communication and packet communication. For details of
those usage fees, see "Mobile Phone User's Guide
[i-mode]" you received when you subscribed to i-mode.
Resetting the call cost automatically
Total call cost is set to zero automatically on the
1st day of each month.
Default OFF
m86624
1
2
Enter the terminal security code
･
To cancel: Enter the terminal security code
2
3 Enter the PIN2 code
INFORMATION
Even if the setting is ON, the setting is canceled when
●
the UIM different from the one used during the setting is
inserted and then turn the power on. It doesn't return to
the previous setting even if the UIM used when setting it
is inserted again.
When the setting is ON, the call cost will be reset if you
●
change the date and time to the next month in Date and
Time Setting.
When the setting is ON, if the terminal is not turned on or
●
if you are talking on the terminal at 00 o'clock of the first
day of the month, a reset will take place when you turn
the power on or end the call.
If the setting is ON, the PIN2 code is required when you
●
turn the power on and the terminal security code is
required when you set the date and time.
Other Convenient Functions
z z
Enter the PIN2 code
Reset Call Cost
z 1
z
309