Terminal Security Code - NTT docomo FOMA D703i User Manual

Scanning divided QR codes
When the data is divided into multiple parts (up to
16), scan them one by one according to messages
displayed on the screen.
Press c to cancel scanning on the way. Select
･
Yes when a confirmation screen appears asking
whether to discard the scanned QR code data.
INFORMATION
If you press m on the still image shooting screen or
●
video recording screen and select Switch mode → Bar
code reader, Bar Code Reader can be used as well.
Press m2 on the bar code reading screen and press
●
1 or 2 to switch to Still Camera or Movie Camera.
When Bar Code Reader is started from the character entry
screen or i- ppli, switching is not available.
α
The scanned data is given a file name made up of the
●
scanned date and time + serial file number + .jan or .qr
(".jan" is for JAN code and ".qr" for QR code). The file
name 20070520123400.jan, for example, means the
JAN code scanned at 12:34 on May 20, 2007. When
there are any previously saved data at the same date
and time, 1 is added to the serial file number. The file
name cannot be changed.
Using the scanned data
The available operations vary depending on the
scanned data.
Example
Adding data to the phonebook
m61
z
1
2 Select the scanned data
■ Deleting the scanned data: Highlight the
z m31
data
To delete all: m32
･

terminal security code

3 Highlight the data to add to the phonebook
m31 (Add new data) or
z
m32 (Update)
2
The phonebook registration screen appears with
the highlighted data entered.
･
To update saved entries, select the party to
add the data.
158 Camera
State of scanning the QR code
Green: Last scanned code
Blue: Scanned codes
Gray: Remaining unscanned
codes
Remaining number of QR
codes/total number of QR codes
p
z
Select Yes
z
Enter the
z
Select Yes
Press 1 or
z
■
Adding all data to the phonebook at one
time: Select Add to phonebook
2
The phonebook registration screen appears.
The name and the reading are also entered
depending on the data.
■ Sending i-mode Mail: Select a mail
address or Compose message
The mail composition screen appears.
･
When Compose message is selected, the
subject and the text are entered depending
on the data.
■ Connecting i-mode sites or Internet
websites: Select a URL
･
When the display is possible in both i-mode
and Full Browser, selecting Yes displays i-mode
and selecting t displays Full Browser.
■ Saving URLs as bookmarks:
z
a Highlight a URL
select Add bookmark
b Select a folder
c Enter a title name (up to 24 one-byte or
12 two-byte characters)
･
When Add bookmark is selected, the title
name is also entered depending on the
data.
■ Starting i- ppli: Select Start i-
α
■
Making a voice/videophone call:
a Select a phone number
dialing conditions ☛P54
b m z
Select Yes
･
To make a call after invalidating the
settings other than Chaku-moji and call
type: m z
Select No, use original
■ Saving still images:
a Select the file name of a still image
Select Save
･
To display a still image: Select Display
b Select each item to set
c Select a folder to save
■
Saving melodies:
a Select a file name of melody
･
To play the melody: Select Play
b Enter a display name
The melody is saved in the Data transfer
folder of Melody in Data Box.
z 1 or
z
Select Yes
m33 or
z p
α ppli
z
Set the
z
z p ☛P270
z
Select Save
z p