NTT docomo FOMA D703i User Manual page 376

･
In case there is the possibility of malfunctions
after checking, contact "Repairs" indicated on
the back of this manual.
Updating software
This function checks for the necessity for updating
FOMA terminal software and downloads part of the
software as required through packet
1
communication* to make updates of the software.
When software update is required, the information
will be posted on the DoCoMo website or
(Notice) in iMenu.
*1 Packet communication for software update is free
of charge.
･
Software may be updated in the following 2
methods:
･
Immediate Update ：
Update on the spot as desired.
･
Reserved Update ：
Reserve a day and time-slot for automatic
update of the software in the specified day
and time.
･
Software cannot be updated in the following
cases:
･
During All Lock
･
While executing other functions
･
When the date and time are not set
･
When the UIM is not inserted
･
When the battery is not fully charged
･
When PIN1 code is being entered
･
When PIN1 code is locked
･ 圏外
When is indicated
･
During PIM Lock
･
The power is off
･
In Self Mode on
･
While talking
･
During Omakase Lock (Remote Lock)
･
During packet communication connecting with
a PC
･
During 64K data communication
･
At the time of updating software, the unique
information of your mobile phone terminal (model
or serial number, etc.) will be automatically sent
to the server (the server for updating software
managed by DoCoMo). DoCoMo will not use the
sent information for any other purpose than
software update.
374 Appendix/Data Interchange/Troubleshooting
INFORMATION
Software update (downloading or rewriting) may take time.
●
If software update is executed when ON is set for PIN1
●
Code On/Off, the PIN code entry screen will be displayed
at the time of automatic reload after completion of
software updating. You cannot make/receive calls and
operate communication functions if the incorrect PIN1
code is entered.
While software is being updated, making/receiving calls,
Software Update ●
various communication functions or other functions are
not available (Incoming voice calls can be answered
while downloading).
If Movie ringtone or Music has been set as a ring alert, a
●
melody sounds for an incoming call during download
instead of Movie ringtone. If you set video/i-motion as an
image, the first image is displayed.
お知らせ
Any incoming videophone call cannot be answered
●
during download. Unanswered calls are recorded as
missed ones in the received call history.
Even if an alarm clock or any alarm is set while software
●
is being updated, the updating continues without
activating the alarm clock or the alarm.
For software update, SSL session is established to the
●
server (our site). Enable SSL certificate in Manage
Certificate. Configured as valid by default. ☛P177
Software update should be done with battery fully
●
charged and enough battery power (
It is recommended that software update be executed
●
when good signal quality is obtained, 3 bars of the
antenna icon (
being moved.
･
If radio wave signals become weaker during software
downloading or downloading has stopped, retry
software update in a place with strong radio wave
signals.
A displayed icon for the message stored at i-mode
●
Center disappears after software update.
If Receive Option Setting is set to ON and mail arrives
during software updating, the screen that notifies an
arrival of mail in the i-mode Center may not appear after
the software update being completed.
Never remove the battery pack while updating software.
●
Update fails.
Software update can be done while various data, such as
●
the phonebook entries registered in FOMA Terminal,
camera images, downloaded data are retained; however,
note that data protection sometimes cannot be secured
depending on the conditions of your FOMA terminal
(such as malfunction, damage, or water leak). DoCoMo
recommends backing up necessary data. (Note that some
data such as downloaded data may not be backed up.)
When software update has failed, the message Rewrite
●
failed appears and all the operations are unavailable. In
such a case, please bring FOMA terminal to a repair
office designated by DoCoMo.
In case updating is not required, when checking the
●
necessity of software update, a message is displayed
indicating update is not necessary, so use as it is.
Software update is available even if Host Selection is set
●
to other than i-mode.
).
) are displayed and the terminal is not