NTT docomo FOMA D703i User Manual page 257

If the horizontal to vertical ratio differs, a size
frame is displayed. Press %/& to adjust
the position of the size frame, and press o to
change the area encompassed by the size
frame to the specified size.
･
Putting the whole still image in the specified
size by ignoring the aspect ratio (Stretch):
m
･
Putting the entire still image in the specified
size by maintaining the aspect ratio (Fit): p
■
Zooming in/out:
a 0 z & to zoom in/out
You can zoom in/out by 5% with horizontal
and vertical ratio held.
Press m to zoom out by 20% or press
･
p to zoom in by 20%.
･
The vertically long still image can be
zoomed in up to 288 x 352 and the
horizontally long still image can be
zoomed in up to 352 x 288 (up to the limit
of either size).
･
Images can be compressed down to a
size having 8 horizontal or vertical dots.
b o
Clipping images to desired sizes
You can clip a part of the still image by specifying the
size or range.
･
When the original still image is less than 16 x 16,
clipping is unavailable.
2 on the edit menu screen
1
2
Clip the still image
■
Clipping the image to the specified size:
a 1 to 9
b O to adjust the clipping position
･
Switching the vertical/horizontal of the
clipping frame: p
Changing the clipping size: t
･
Specifying the clipping range: m
･
c o
■
Specifying the range and clipping:
a 0 z O to adjust the position of
z o
The position of upper left of the range
specification frame is set and
displayed on the lower right of the frame.
b O to adjust the position of
The clipping range is set and the range
specification frame is displayed in solid
line.
･
･
c o
Changing brightness and tone
3 on the edit menu screen
1
2 Change the brightness and tone
■ Adjusting the brightness:
a 1
･
･
b o
■
Changing the tone to monotone or sepia:
2 or 3
Applying special effects
4 on the edit menu screen
1
2
Select the type of effect
Soften
Spherical ： Swells the still image spherically from
Emboss ：Turns leaden color and emphases
Spiral
Shiny
Mosaic ：Attaches a mosaic.
Reversing/rotating
5 on the edit menu screen
1
2 Reverse/rotate the still image
% ：Reverse up and down
&：Reverse left and right
m：Rotate 90 degrees to the left
p：Rotate 90 degrees to the right
is
Press o
3
Press o instead of p to change the
position of the upper left again.
Use O after pressing p to move the
range specification frame.
z & to adjust the brightness
Maximizing: p
Minimizing: m
：Softens the image.
the center.
concavity and convexity.
：Makes the still image look as if it is
spiraling out from the center.
：Attaches a mark as glistening.
Displaying/Editing/Managing Data
z p
255
Next