NTT docomo FOMA D703i User Manual page 407

When the warning screen appears
When the attached CD-ROM is inserted into the
PC, the following warning screen may appear.
This warning is displayed according to the security
setting of Microsoft Internet Explorer, but this will
not cause a problem.
はい
Click (Yes).
･
The screen shown below is the case of using
Windows XP. It may differ depending on the PC
environment.
Required devices
The following hardware and software are required in
addition to FOMA terminal and a PC:
･
FOMA USB Cable (optional) or FOMA USB Cable
with Charge Function 01 (optional)
･
Attached CD-ROM "CD-ROM for FOMA D703i"
INFORMATION
● Purchase a dedicated "FOMA USB Cable" or FOMA
USB Cable with Charge Function 01 for a USB
1
cable* . A USB cable for PC cannot be used
because the shape of the connector does not fit.
*1In this manual, FOMA USB Cable is used for
explanation.
Usage precautions
Internet service provider usage charge
When using the Internet from PC, usage charge to
your Internet service provider (hereinafter called the
provider) is generally required. This charge is paid
directly to the provider, and is separate from the
FOMA service charge. For more information on
usage charges, contact your provider.
･
DoCoMo provides 2 Internet connection services:
mopera U and mopera.
The mopera U service requires subscription and a
monthly fee. It allows you to use broadband Internet
connection service, etc. There is also a plan that
requires a monthly fee only when you use the service.
The mopera service allows you to access the
Internet without subscription and monthly fee. You
can make a connection with Internet immediately.
For details such as on charges, visit the DoCoMo
website.
Setting the dialup connection (provider, etc.)
Different dialup connections are required for packet
communication and 64K data communication. When
performing packet communication, use the dialup
connection for FOMA packet communication. When
performing 64K data communication, use the dialup
connection for FOMA 64K data communication or
ISDN synchronized 64 kbps data communication.
･
You cannot connect to access points of PHS 64K/
32K data communication such as PIAFS or DoPa.
User authentication during network access
Some dialup connections require user authentication (ID
and password) before a connection can be established.
If user authentication is required, you must use your
communication software or dialup network to enter your
ID and password before connection. Your ID and
password will be assigned by the provider or network
administrator of in-house LAN, etc. For more information,
contact your provider or network administrator.
Access authentication when using PC browser
To authenticate FirstPass (user certificate), you must
install FirstPass PC software from the attached CD-
ROM and configure it. For details, see "
アル
(Simple User's Manual)(FirstPassManual.pdf)" in
the CD-ROM.
Conditions of packet communication and
64K data communication
To perform data communication from FOMA terminal,
the following conditions must be satisfied.
･
The PCs which may use a FOMA USB Cable
(optional).
･
You must be within the FOMA service area.
･
Packet communication requires an access point
that supports FOMA packet communications.
･
64K data communication requires an access point
that supports FOMA 64K or ISDN synchronized 64
kbps data communication.
However, even when the above requirements are
satisfied, you may not be able to perform data
communication if base station traffic is heavy, or the
signal quality is poor.
2
簡易操作マニュ
Next