NTT docomo FOMA D703i User Manual page 410

Installation of the communication
configuration file (driver)
Installing the communication configuration file
Before operation, read "Before installation/
uninstallation". ☛P3
･
Perform Steps 1 to 5 first, and then connect
FOMA terminal to a PC.
Example For Windows XP
1 Insert the attached CD-ROM into the PC
The FOMA D703i CD-ROM screen appears.
• For the FOMA D703i CD-ROM screen, the
recommended operating environment is Microsoft
Internet Explorer 6.0 or later. In case your PC does
not satisfy the recommended environment or
when the FOMA D703i CD-ROM screen does not
appear even though CD-ROM is set, operate in
the following steps:
a Click
スタート
(Start) and
して実行
(Specify the file name and execute)
b Enter <CD-ROM
￥ USBDRIVE ￥ D703iin.exe in 名前 (Name)
z
Click OK
Got to Step 5
2 データリンクソフト・各種設定
Click
ソフト
(Datalink software, configuration
software)
3 インストール
Click
通信設定ファイル
communication configuration file (driver))
Double-click D703iin.exe
4
ファイル名を指定
ドライブ名
(Drive name)>:
(Installation) of D703i
( )(D703i
ドライバ
インストール開始
5 Click
A screen requesting to connect FOMA D703i to
the PC appears.
Connect FOMA terminal to the PC ☛P4
6
The communication configuration file is installed.
･
Connect FOMA terminal while the power is on.
Click OK
7
･
To return to the screen of "FOMA D703i CD-
ROM", click
Explorer.
･
Go to "Checking the communication configuration
file", and check the name of the device installed.
INFORMATION
● Installation may take a few minutes.
● When Windows rebooting is prompted on the screen,
follow the instruction and reboot.
● If a PC and FOMA terminal are connected before
the communication configuration file is installed,
another driver may be automatically installed. When
this happens, performing the operation in Step 2
displays a message saying that the installed driver
must be uninstalled. Uninstall the driver following
instruction shown on the display and install the
communication configuration file.
Checking the communication configuration file
When the PC does not detect FOMA terminal correctly,
settings and communication cannot be performed.
Example For Windows XP
スタート
1 Click
(Control panel),
z
ナンス
(Performance and maintenance)
and システム
システムのプロパティ
The
screen appears.
■ For Windows 2000:
a Click
ロールパネル
b Double-click
ハードウェア
2 Click the
デバイスマネージャ
Click
manager)
デバイスマネージャ
The
5
(Start installing)
戻る
(Return) of Microsoft Internet
コントロールパネル
,
パフォーマンスとメンテ
(System)
(System properties)
スタート 設定
, (Setting) and
システム
(Hardware) tab
(Device
screen appears.
コント
z
Next