Ldap Parameters - AudioCodes Mediant 3000 User Manual

User's Manual
Parameter
Web: RADIUS VSA
Vendor ID
CLI: vsa-vendor-id
[RadiusVSAVendorID]
Web: RADIUS VSA
Access Level Attribute
CLI: vsa-access-level
[RadiusVSAAccessAttri
bute]
[MaxRADIUSSessions]
EMS: RADIUS Auth
Number of Retries
[RADIUSRetransmission
]
[RadiusTO]
51.14.2.3

LDAP Parameters

The Lightweight Directory Access Protocol (LDAP) parameters are described in the table
below.
Parameter
Web: LDAP Service
CLI: configure
voip/ldap/enable
[LDAPServiceEnable]
CLI: search-dns-in-parallel
[LDAPSearchDNsinParalle
l]
Web: LDAP Search Server
Method
CLI: ldap-search-server-
method
[LDAPSearchServerMetho
d]
Web: LDAP Authentication
Filter
Version 6.8

[0] = Each request requires RADIUS authentication.
Defines the vendor ID that the device accepts when parsing a RADIUS
response packet.
The valid range is 0 to 0xFFFFFFFF. The default is 5003.
Defines the code that indicates the access level attribute in the Vendor
Specific Attributes (VSA) section of the received RADIUS packet.
The valid range is 0 to 255. The default is 35.
Defines the number of concurrent calls that can communicate with the
RADIUS server (optional).
The valid range is 0 to 240. The default is 240.
Defines the number of retransmission retries.
The valid range is 1 to 10. The default is 3.
Defines the time interval (measured in seconds) that the device waits
for a response before a RADIUS retransmission is issued.
The valid range is 1 to 30. The default is 10.
LDAP Parameters
Enables the LDAP feature.

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
Defines the method of how the device queries the DN object within
each LDAP server.

[0] Sequential = (Default) The query is done in each DN object,
one by one, until a result is returned.

[1] Parallel = The query is done in all DN objects at the same
time.
Defines the method of how the device queries between two LDAP
severs.

[0] Sequential = The device first queries one of the LDAP
servers, and if the DN object is not found, it queries the second
LDAP server.

[1] Parallel = (Default) The device queries the LDAP servers at
the same time.
Defines the LDAP search filter attribute for searching the login
username in the directory's subtree for LDAP-based user
965
51. Configuration Parameters Reference
Description
Description
Mediant 3000