Viewing Registered Users; Viewing Registration Status - AudioCodes Mediant 3000 User Manual

44.7

Viewing Registered Users

You can view SAS and SBC users listed in the device's Users Registration database. The
list shows each Address of Record (AOR) and its corresponding contact. The contact's
registration status is also shown:

"Active status:1" indicates that the contact has been successfully registered and thus,
calls can be routed to it.

"Active status:0" indicates that the device has recently received a REGISTER request
from the contact, but the contact has yet to be registered. The device removes the
contact from the database if no response is received within a few seconds from the
proxy/registrar server.
An AOR is a SIP or SIPS URI that points to a domain with a location service that can map
the URI to another URI (contact) where the user might be available. A contact is a SIP URI
that can be used to contact that specific instance of the user agent for subsequent
requests.

To view registered SAS/SBC users in the Users Registration database:

Web: SAS/SBC Registered Users page (Status & Diagnostics tab > VoIP Status
menu > SAS/SBC Registered Users).
44.8

Viewing Registration Status

The Registration Status page displays the registration status of the device's SIP Accounts,
which are configured in the Accounts table (see ''Configuring Registration Accounts'' on
page 303).

To view the registration status:

Open the Registration Status page (Status & Diagnostics tab > VoIP Status menu >
Registration Status).
•
Registered Per Gateway: Registration of device as one entity - "YES" or "NO"
•
Accounts Registration Status:
♦
♦
♦
User's Manual
Figure 44-7: SAS/SBC Registered Users Page
Group Type: served Trunk Group or IP Group
Group Name: name of the served Trunk Group or IP Group, if applicable
Status: "Registered" or "Unregistered"
660
Mediant 3000
Document #: LTRT-89738