AudioCodes Mediant 3000 User Manual page 958

Parameter
Web: AGC Redirection
EMS: Redirection
[AGCRedirection]
Web: AGC Target Energy
EMS: Target Energy
[AGCTargetEnergy]
Web: AGC Minimum Gain
EMS: Minimal Gain
[AGCMinGain]
Web: AGC Maximum Gain
EMS: Maximal Gain
[AGCMaxGain]
Web/EMS: Disable Fast Adaptation
[AGCDisableFastAdaptation]
Answering Machine Detection (AMD) Parameters
Web: Web: Answer Machine
Detector Sensitivity Parameter Suit
[AMDSensitivityParameterSuit]
Web: Answer Machine Detector
Sensitivity Level
User's Manual

[18] 18 = 9.00 dB/sec

[19] 19 = 10.00 dB/sec

[20] 20 = 11.00 dB/sec

[21] 21 = 12.00 dB/sec

[22] 22 = 13.00 dB/sec

[23] 23 = 14.00 dB/sec

[24] 24 = 15.00 dB/sec

[25] 25 = 20.00 dB/sec

[26] 26 = 25.00 dB/sec

[27] 27 = 30.00 dB/sec

[28] 28 = 35.00 dB/sec

[29] 29 = 40.00 dB/sec

[30] 30 = 50.00 dB/sec

[31] 31 = 70.00 dB/sec
Determines the AGC direction.

[0] 0 = (Default) AGC works on signals from the TDM side.

[1] 1 = AGC works on signals from the IP side.
Defines the signal energy value (dBm) that the AGC attempts to
attain.
The valid range is 0 to -63 dBm. The default is -19 dBm.
Defines the minimum gain (in dB) by the AGC when activated.
The range is 0 to -31. The default is -20.
Note: For this parameter to take effect, a device reset is
required.
Defines the maximum gain (in dB) by the AGC when activated.
The range is 0 to 18. The default is 15.
Note: For this parameter to take effect, a device reset is
required.
Enables the AGC Fast Adaptation mode.

[0] = Disable (default)

[1] = Enable
Note: For this parameter to take effect, a device reset is
required.
Global parameter that defines the AMD Parameter Suite to use.
You can also configure this functionality per specific calls, using
IP Profiles (IpProfile_AMDSensitivityParameterSuit). For a
detailed description of this parameter and for configuring this
functionality in the IP Profile table, see Configuring IP Profiles
on page 329.
For more information on AMD, see 'Answering Machine
Detection (AMD)' on page
Note: If this functionality is configured for a specific IP Profile,
the settings of this global parameter is ignored for calls
associated with the IP Profile.
Global parameter that defines the AMD detection sensitivity
level of the selected AMD Parameter Suite. You can also
configure this functionality per specific calls, using IP Profiles
958
Description
200.
Document #: LTRT-89738
Mediant 3000