AudioCodes Mediant 3000 User Manual page 948

Parameter
Timeout
CLI: configure voip/sbc general-
setting/sbc-fax-detection-
timeout
[SBCFaxDetectionTimeout]
Admission Control Table
Web: Admission Control
EMS: Call Admission Control
[SBCAdmissionControl]
Allowed Audio Coders Table
Web: Allowed Audio Coders
[AllowedCodersGroupX]
Allowed Video Coders Table
[AllowedVideoCodersGroupX
]
User's Manual
detect fax (CNG tone) immediately upon the establishment of a
voice session. The interval starts from the establishment of the
voice call.
The valid value is 1 to any integer. The default is 10.
The feature applies to faxes that are sent immediately after the
voice channel is established (i.e., after 200 OK).
You can configure the handling of fax negotiation by the device for
specific calls, using IP Profiles configured in the IP Profile table
(see the IpProfile_SBCRemoteRenegotiateOnFaxDetection
parameter in Configuring IP Profiles).
This table parameter defines Call Admission Control (CAC) rules
for limiting the number of allowed concurrent calls (SIP dialogs).
The format of the ini file table parameter is as follows:
[SBCAdmissionControl]
FORMAT SBCAdmissionControl_Index =
SBCAdmissionControl_AdmissionControlName,
SBCAdmissionControl_LimitType,
SBCAdmissionControl_IPGroupID, SBCAdmissionControl_SRDID,
SBCAdmissionControl_RequestType,
SBCAdmissionControl_RequestDirection,
SBCAdmissionControl_Limit, SBCAdmissionControl_LimitPerUser,
SBCAdmissionControl_Rate, SBCAdmissionControl_MaxBurst,
SBCAdmissionControl_Reservation;
[\SBCAdmissionControl]
For a detailed description of this table, see ''Configuring Admission
Control'' on page 523.
This table parameter defines Allowed Coders Groups, which
determine the audio (voice) coders that can be used for a specific
SIP entity.
The format of the ini file table parameter is as follows:
[AllowedCodersGroupX]
FORMAT AllowedCodersGroup_Index =
AllowedCodersGroup_Name;
[\AllowedCodersGroup]
Where X represents the index number.
For a detailed description of this table, see ''Configuring Allowed
Audio Coder Groups'' on page 527.
This table parameter defines Allowed Video Coders Groups, which
determine the video coders that can be used for a specific SIP
entity.
The format of the ini file table parameter is as follows:
[AllowedVideoCodersGroup0]
FORMAT AllowedVideoCodersGroup_Index =
AllowedVideoCodersGroup_Name;
[\AllowedVideoCodersGroup]
Where X represents the index number.
For a detailed description of this table, see ''Configuring Allowed
948
Description
Document #: LTRT-89738
Mediant 3000