AudioCodes Mediant 3000 User Manual page 301

User's Manual
Parameter
Web/EMS: SRD Index
[ProxySet_SRD]
Web/EMS: Classification Input
[ProxySet_ClassificationInput
]
Web/EMS: TLS Context Index
CLI: tls-context-index
[ProxySet_TLSContext]
Version 6.8
Keep-Alive mechanism (using the 'Enable Proxy Keep Alive'
parameter).

The Homing option can only be used if the 'Enable Proxy Keep
Alive' parameter is set to Using Options.
Assigns an SRD to the Proxy Set ID.
The default is SRD 0.
Notes:

For this parameter to take effect, a device reset is required.

To configure SRDs, see Configuring SRDs on page 275.
Defines how the device classifies IP calls to the Proxy Set.

[0] IP Only = (Default) The call is classified to the Proxy Set
according to its IP address only.

[1] IP + Port + Transport = The call is classified to the Proxy Set
according to its IP address, port, and transport type.
Note: This parameter is applicable only if the IP Group table's
parameter, 'Classify by Proxy Set' is set to Enable.
Assigns a TLS Context (SSL/TLS certificate) to the Proxy Set. The
TLS Context is assigned by index number, as configured in the
TLS Contexts table.

Incoming calls: If the 'Transport Type' parameter (above) is set
to TLS and the incoming call is successfully classified to an IP
Group based on this Proxy Set, this TLS Context is used. If the
'Transport Type' parameter is set to UDP or classification to this
Proxy Set fails, this TLS Context is not used. Instead, the device
uses the TLS Context configured for the SIP Interface (see
Configuring SIP Interfaces on page 279) used for the call;
otherwise, the default TLS Context (ID 0) is used.

Outgoing calls: If the 'Transport Type' parameter (above) is set
to TLS and the outgoing call is sent to an IP Group that is
associated with this Proxy Set, this TLS Context is used.
Instead, the device uses the TLS Context configured for the SIP
Interface (see Configuring SIP Interfaces) used for the call;
otherwise, the default TLS Context (ID 0) is used. If the
'Transport Type' parameter is set to UDP, the device uses UDP
to communicate with the proxy and no TLS Context is used.
For more information about how certificates are associated with
calls and for configuring TLS Contexts, see Configuring SSL/TLS
Certificates on page 109.
301
18. Control Network
Description
Mediant 3000