Services; Sip-Based Media Recording Parameters; Radius And Ldap Parameters; General Parameters - AudioCodes Mediant 3000 User Manual

51.14 Services

51.14.1 SIP-based Media Recording Parameters

The SIP-based media recording parameters are described in the table below.
Table 51-70: SIP-based Media Recording Parameters
Parameter
Web: SIP Recording Application
[EnableSIPRec]
Web: Recording Server (SRS)
Destination Username
[SIPRecServerDestUsername]
SIP Recording Routing Table
Web: SIP Recording Routing
table
[SIPRecRouting]

51.14.2 RADIUS and LDAP Parameters

51.14.2.1

General Parameters

The general RADIUS and LDAP parameters are described in the table below.
Parameter
Web: Use Local Users
Database
CLI: configure system >
mgmt-auth > use-local-
users-db
[MgmtLocalDatabaseBe
havior]
User's Manual
Enables the SIP-based Media Recording feature:

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
Defines the SIP user part for the recording server. This user part is
added in the SIP To header of the INVITE message that the device
sends to the recording server.
The valid value is a string of up to 50 characters. By default, no
user part is defined.
Defines SIP Recording Routing rules (calls to record).
The format of the ini file table parameter is as follows:
[ SIPRecRouting ]
FORMAT SIPRecRouting_Index =
SIPRecRouting_RecordedIPGroupID,
SIPRecRouting_RecordedSourcePrefix,
SIPRecRouting_RecordedDestinationPrefix,
SIPRecRouting_PeerIPGroupID,
SIPRecRouting_PeerTrunkGroupID, SIPRecRouting_Caller,
SIPRecRouting_SRSIPGroupID;
[ \SIPRecRouting ]
For a detailed description of this table, see ''Configuring SIP
Recording Routing Rules'' on page 214.
General RADIUS and LDAP Parameters
Defines when the device uses its local user database (Web Users
table) for LDAP- or RADIUS-based management-user login
authentication.

[0] When No Auth Server Defined = (Default) When no
LDAP/RADIUS server is configured (or as fallback if the server is
inaccessible).

[1] Always = Always first verify the user's credentials in the Web
962
Description
Description
Document #: LTRT-89738
Mediant 3000