AudioCodes Mediant 3000 User Manual page 144


To configure the internal DNS table:
1. Open the Internal DNS Table page (Configuration tab > VoIP menu > Network >
DNS > Internal DNS Table).
2. Click Add; the following dialog box appears:
Figure 13-4: Internal DNS Table - Add Record Dialog Box
3. Configure the DNS rule, as required. For a description of the parameters, see the
table below.
4. Click Submit; the DNS rule is added to the table.
Table 13-11: Internal DNS Table Parameter Description
Parameter
Domain Name
[Dns2Ip_DomainName]
First IP Address
[Dns2Ip_FirstIpAddress]
Second IP Address
[Dns2Ip_SecondIpAddress]
Third IP Address
[Dns2Ip_ThirdIpAddress]
Fourth IP Address
[Dns2Ip_FourthIpAddress]
User's Manual
Defines the host name to be translated.
The valid value is a string of up to 31 characters.
Defines the first IP address (in dotted-decimal format notation) to
which the host name is translated. The IP address can be
configured as an IPv4 and/or IPv6 address.
Defines the second IP address (in dotted-decimal format notation)
to which the host name is translated.
Defines the third IP address (in dotted-decimal format notation) to
which the host name is translated.
Defines the fourth IP address (in dotted-decimal format notation) to
which the host name is translated.
Note: Currently, this parameter is not supported.
144
Description
Document #: LTRT-89738
Mediant 3000