AudioCodes Mediant 3000 User Manual page 807

User's Manual
Parameter
Web/EMS: Enable P-
Associated-URI Header
[EnablePAssociatedURIHe
ader]
Web/EMS: Source Number
Preference
[SourceNumberPreference
]
[SelectSourceHeaderForC
alledNumber]
Web/EMS: Enable Reason
Header
[EnableReasonHeader]
Version 6.8
Determines the device usage of the P-Associated-URI header. This
header can be received in 200 OK responses to REGISTER requests.
When enabled, the first URI in the P-Associated-URI header is used in
subsequent requests as the From/P-Asserted-Identity headers value.

[0] Disable (default)

[1] Enable
Note: P-Associated-URIs in registration responses is handled only if
the device is registered per endpoint (using the User Information file).
Determines from which SIP header the source (calling) number is
obtained in incoming INVITE messages.

If not configured or if any string other than "From" or "Pai2" is
configured, the calling number is obtained from a specific header
using the following logic:
a. P-Preferred-Identity header.
b. If the above header is not present, then the first P-Asserted-
Identity header is used.
c. If the above header is not present, then the Remote-Party-ID
header is used.
d. If the above header is not present, then the From header is
used.

"From" = The calling number is obtained from the From header.

"Pai2" = The calling number is obtained using the following logic:
a. If a P-Preferred-Identity header is present, the number is
obtained from it.
b. If no P-Preferred-Identity header is present and two P-
Asserted-Identity headers are present, the number is obtained
from the second P-Asserted-Identity header.
c. If only one P-Asserted-Identity header is present, the calling
number is obtained from it.
Notes:

The "From" and "Pai2" values are not case-sensitive.

Once a URL is selected, all the calling party parameters are set
from this header. If P-Asserted-Identity is selected and the Privacy
header is set to 'id', the calling number is assumed restricted.
Determines the SIP header used for obtaining the called number
(destination) for IP-to-Tel calls.

[0] Request-URI header = (Default) Obtains the destination number
from the user part of the Request-URI.

[1] To header = Obtains the destination number from the user part
of the To header.

[2] P-Called-Party-ID header = Obtains the destination number
from the P-Called-Party-ID header.
Enables the usage of the SIP Reason header.

[0] Disable

[1] Enable (default)
807
51. Configuration Parameters Reference
Description
Mediant 3000