Voip Interfaces For Combined Application Types - AudioCodes Mediant 3000 User Manual

Gateway & enterprise sbc, family of media gateways & session border controllers

Hide thumbs Also See for Mediant 3000:

Table of Contents

'VLAN Mode' is set to Enable.

'Native VLAN ID' field is set to "1".

Static Route table: A routing rule is required to allow remote management from a

host in 176.85.49.0 / 24:

All other parameters are set to their respective default values. The NTP application

remains with its default application types.

13.3.3.3 VoIP Interfaces for Combined Application Types

This example describes the configuration of multiple interfaces for the following

applications:

One interface for the OAMP application.

Interfaces for Call Control and Media applications, where two of them are IPv4

interfaces and one is an IPv6 interface.

Interface table:

Table 13-6: Example of VoIP Interfaces of Combined Application Types in Interface Table

VLANs are required and the Native VLAN ID is the same VLAN ID as the

Management interface (index 0):

'VLAN Mode' is set to Enable.

'Native VLAN ID' field is set to "1".

Static Route table: A routing rule is required to allow remote management from a

host in 176.85.49.0/24:

The NTP application is configured (using the ini file) to serve as OAMP applications:

EnableNTPasOAM = 1

User's Manual

Table 13-5: Example Static Route Table

192.168.85.14

200.200.85.14

200.200.86.14

2000::1:200:200:86:14

Table 13-7: Example of Static Route Table

Prefix Length

200.200.85.1

200.200.86.1

Mediant 3000

V6CntrlMedia2

192.168.0.10

Document #: LTRT-89738