AudioCodes Mediant 3000 User Manual page 557

User's Manual
Parameter
Leave From Right
[IPOutboundManipulation_LeaveFro
mRight]
Prefix to Add
[IPOutboundManipulation_Prefix2Ad
d]
Suffix to Add
[IPOutboundManipulation_Suffix2Ad
d]
Privacy Restriction Mode
[IPOutboundManipulation_PrivacyRe
strictionMode]
Version 6.8
Defines the number of digits to keep from the right of the
manipulated item.
Defines the number or string to add in the front of the
manipulated item. For example, if you enter 'user' and the
user name is "john", the new user name is "userjohn".
If you set the 'Manipulated Item' parameter to Source URI
or Destination URI, you can configure this parameter to a
string of up 49 characters. If you set the 'Manipulated Item'
parameter to Calling Name, you can configure this
parameter to a string of up 36 characters.
Defines the number or string to add at the end of the
manipulated item. For example, if you enter '01' and the
user name is "john", the new user name is "john01".
If you set the 'Manipulated Item' parameter to Source URI
or Destination URI, you can configure this parameter to a
string of up 49 characters. If you set the 'Manipulated Item'
parameter to Calling Name, you can configure this
parameter to a string of up 36 characters.
Defines user privacy handling (i.e., restricting source user
identity in outgoing SIP dialogs).

[0] Transparent = (Default) No intervention in SIP
privacy.

[1] Don't change privacy = The user identity in the
outgoing SIP dialog remains the same as in the
incoming SIP dialog. If a restricted number exists, the
restricted presentation is normalized as follows:

From URL header:
"anonymous@anonymous.invalid"

If a P-Asserted-Identity header exists (either in the
incoming SIP dialog or added by the device), a
Privacy header is added with the value "id".

[2] Restrict = The user identity is restricted. The
restriction presentation is as follows:

From URL header:
"anonymous@anonymous.invalid"

If a P-Asserted-Identity header exists (either in the
incoming SIP dialog or added by the device), a
Privacy header is added with the value "id".

[3] Remove Restriction = The device attempts to reveal
the user identity by setting user values in the From
header and removing the privacy "id" value if the
Privacy header exists. If the From header user is
anonymous, the value is taken from the P-Preferred-
Identity, P-Asserted-Identity, or Remote-Party-ID header
(if exists).
Note:

Restriction is done only after user number manipulation
(if any).

The device identifies an incoming user as restricted if
one of the following exists:

From header user is "anonymous".

P-Asserted-Identity and Privacy headers contain
557
29. SBC Configuration
Description
Mediant 3000