AudioCodes Mediant 3000 User Manual page 263

User's Manual
The following procedure describes how to configure Bandwidth Profiles in the Web
interface. You can also configure Bandwidth Profiles using the table ini file parameter,
BWProfile .

To configure Bandwidth Profiles:
1. Open the Bandwidth Profile page (Configuration tab > VoIP menu > Quality of
Experience > Bandwidth Profile).
2. Click Add; the following dialog box appears:
The figure above shows a configuration example where if the outgoing voice traffic
threshold of 64,000 increases by 80% (70% warning threshold plus 10% hysteresis) to
115,200 (64,000 plus 51,200), a Yellow state occurs and an alarm is sent. If the
threshold increases by 10%, a Red state occurs and an alarm is sent.
3. Configure a Bandwidth Profile according to the parameters described in the table
below.
4. Click Submit, and then reset the device with a save ("burn") to flash memory.
Table 17-3: Bandwidth Profile Table Parameter Descriptions
Parameter
Index
[BWProfile_Index]
Name
[BWProfile_Name]
Egress Audio Bandwidth
[BWProfile_EgressAudioBandwidth]
Ingress Audio Bandwidth
[BWProfile_IngressAudioBandwidth]
Egress Video Bandwidth
[BWProfile_EgressVideoBandwidth]
Ingress Video Bandwidth
[BWProfile_IngressVideoBandwidth]
Total Egress Bandwidth
[BWProfile_TotalEgressBandwidth]
Version 6.8
Figure 17-4: Bandwidth Profile Page - Add Record
Defines the index of the table row entry.
Defines an arbitrary name to easily identify the Bandwidth
Profile.
The valid value is a string of up to 20 characters.
Defines the outgoing audio traffic threshold (in Kbps).
Defines the incoming audio traffic threshold (in Kbps).
Defines the outgoing video traffic threshold (in Kbps).
Defines the incoming video traffic threshold (in Kbps).
Defines the total (video and audio) outgoing bandwidth
threshold (in Kbps).
Description
263
17. Quality of Experience
Mediant 3000