Radius And Ldap Parameters - AudioCodes Mediant 800B User Manual

User's Manual

61.14.2 RADIUS and LDAP Parameters

61.14.2.1 General Parameters
The general RADIUS and LDAP parameters are described in the table below.
Parameter
Use Local Users Database
configure system >
mgmt-auth > use-local-
users-db
[MgmtUseLocalUsersDatabase]
Behavior upon Authentication
Server Timeout
configure system >
mgmt-auth > timeout-
behavior
[MgmtBehaviorOnTimeout]
Default Access Level
default-access-level
[DefaultAccessLevel]
Version 7.0
Table 61-77: General RADIUS and LDAP Parameters
Defines when the device uses its local management-users
database (Web Users table) or an LDAP/RADIUS server for
authenticating the login credentials (username-password) of users
when logging into the device's management interface (e.g., Web or
CLI).

[0] When No Auth Server Defined = (Default) The device
authenticates the users usng the Web Users table in the
following scenarios:

If no LDAP/RADIUS server is configured.

If an LDAP/RADIUS server is configured, but connectivity
with the server is down. If there is connectivity with the
server, the device uses the server to authenticate the user.

[1] Always = The device first attempts to authenticate the user
using the Web Users table. If no user is found (based on the
username-password combination), it attempts to authenticate
the user using the LDAP/RADIUS server.
Defines the device's response when a connection timeout occurs
with the LDAP/RADIUS server.

[0] Deny Access = User is denied access to the management
platform.

[1] Verify Access Locally = (Default) Device verifies the user's
credentials in its Web Users table (local database).
Note: The parameter is applicable to LDAP- and RADIUS-based
management-user login authentication.
Defines the default access level for the device when the
LDAP/RADIUS response doesn't include an access level attribute
for determining the user's management access level.
The valid range is 0 to 255. The default is 200 (i.e., Security
Administrator).
Note: The parameter is applicable to LDAP- or RADIUS-based
management-user login authentication and authorization.
61. Configuration Parameters Reference
Description
1167 Mediant 800B Gateway and E- SBC