AudioCodes Mediant 3000 User Manual page 916

Parameter
Trunk Group Settings
Web: Trunk Group Settings
EMS: SIP Routing > Hunt Group
[TrunkGroupSettings]
Web: Channel Select Mode
EMS: Channel Selection Mode
[ChannelSelectMode]
Web: Default Destination Number
User's Manual
[TrunkGroup]
FORMAT TrunkGroup_Index =
TrunkGroup_TrunkGroupNum, TrunkGroup_FirstTrunkId,
TrunkGroup_FirstBChannel, TrunkGroup_LastBChannel,
TrunkGroup_FirstPhoneNumber, TrunkGroup_ProfileId,
TrunkGroup_LastTrunkId, TrunkGroup_Module;
[\TrunkGroup]
Notes:

Trunk Group ID 1 is denoted as 0 in the table.

For a description of this table, seeConfiguring Trunk
Group Table on page 391.
This table parameter configures the rules for channel
allocation per Trunk Group.
The format of the ini file table parameter is as follows:
[TrunkGroupSettings]
FORMAT TrunkGroupSettings_Index =
TrunkGroupSettings_TrunkGroupId,
TrunkGroupSettings_ChannelSelectMode,
TrunkGroupSettings_RegistrationMode,
TrunkGroupSettings_GatewayName,
TrunkGroupSettings_ContactUser,
TrunkGroupSettings_ServingIPGroup,
TrunkGroupSettings_MWIInterrogationType,
TrunkGroupSettings_TrunkGroupName;
[\TrunkGroupSettings]
For a description of this table, see ''Configuring Trunk Group
Settings'' on page 393.
Defines the method for allocating incoming IP-to-Tel calls to
a channel. This parameter applies to the following:

All Trunk Groups configured without a channel select
mode in the Trunk Group Settings table (see ''Configuring
Trunk Group Settings'' on page 393).

All channels and trunks configured without a Trunk Group
ID.
for all Trunk Groups channels that are configured without a
Trunk Group ID,.

[0] By Dest Phone Number

[1] Cyclic Ascending (default)

[2] Ascending

[3] Cyclic Descending

[4] Descending

[5] Dest Number + Cyclic Ascending.

[6] By Source Phone Number

[7] Trunk Cyclic Ascending

[8] Trunk & Channel Cyclic Ascending

[11] Dest Number + Ascending
For a detailed description of the parameter's options, see
''Configuring Trunk Group Settings'' on page 393.
Defines the default destination phone number, which is used
if the received message doesn't contain a called party
916
Mediant 3000
Description
Document #: LTRT-89738