AudioCodes Mediant 3000 User Manual page 959

User's Manual
Parameter
[AMDSensitivityLevel]
Web: AMD Sensitivity File
[AMDSensitivityFileName]
[AMDSensitivityFileUrl]
[AMDMinimumVoiceLength]
EMS: AMD Max Greeting Time
[AMDMaxGreetingTime]
EMS: AMD Max Post Silence
Greeting Time
[AMDMaxPostGreetingSilenceTim
e]
EMS: Time Out
[AMDTimeout]
Version 6.8
(IpProfile_AMDSensitivityLevel). For a detailed description of
this parameter and for configuring this functionality in the IP
Profile table, see Configuring IP Profiles on page 329.
Note: If this functionality is configured for a specific IP Profile,
the settings of this global parameter is ignored for calls
associated with the IP Profile.
Defines the name of the AMD Sensitivity file that contains the
AMD Parameter Suites.
Notes:

This file must be in binary format (.dat). You can use the
DConvert utility to convert the original file format from XML to
.dat.

You can load this file using the Web interface (see Loading
Auxiliary Files on page 587).
Defines the URL path to the AMD Sensitivity file for
downloading from a remote server.
Defines the AMD minimum voice activity detection duration (in
5-ms units). Voice activity duration below this threshold is
ignored and considered as non-voice.
The valid value range is 10 to 100. The default is 42 (i.e., 210
ms).
Global parameter that defines the maximum duration that the
device can take to detect a greeting message. You can also
configure this functionality per specific calls, using IP Profiles
(IpProfile_AMDMaxGreetingTime). For a detailed description of
this parameter and for configuring this functionality in the IP
Profile table, see Configuring IP Profiles on page 329.
Note: If this functionality is configured for a specific IP Profile,
the settings of this global parameter is ignored for calls
associated with the IP Profile.
Global parameter that defines the maximum duration of silence
from after the greeting time is over (defined by
AMDMaxGreetingTime) until the device's AMD decision. You
can also configure this functionality per specific calls, using IP
Profiles (IpProfile_AMDMaxPostSilenceGreetingTime). For a
detailed description of this parameter and for configuring this
functionality in the IP Profile table, see Configuring IP Profiles
on page 329.
Note: If this functionality is configured for a specific IP Profile,
the settings of this global parameter is ignored for calls
associated with the IP Profile.
Defines the timeout (in msec) between receiving Connect
messages from the ISDN and sending AMD results.
The valid range is 1 to 30,000. The default is 2,000 (i.e., 2
seconds).
959
51. Configuration Parameters Reference
Description
Mediant 3000