AudioCodes Mediant 3000 User Manual page 877

User's Manual
Parameter
Web: Generate Digit On Time
[CASStateMachineGenerateDig
itOnTime]
Web: Generate Inter Digit Time
[CASStateMachineGenerateInte
rDigitTime]
Web: DTMF Max Detection Time
[CASStateMachineDTMFMaxOn
DetectionTime]
Web: DTMF Min Detection Time
[CASStateMachineDTMFMinOn
DetectionTime]
Web: MAX Incoming Address
Digits
[CASStateMachineMaxNumOfI
ncomingAddressDigits]
Web: MAX Incoming ANI Digits
[CASStateMachineMaxNumOfI
ncomingANIDigits]
Web: Collect ANI
[CASStateMachineCollectANI]
Web: Digit Signaling System
[CASStateMachineDigitSignalin
gSystem]
Version 6.8
Generates digit on-time (in msec).
The value must be a positive value. The default is -1.
Generates digit off-time (in msec).
The value must be a positive value. The default is -1.
Detects digit maximum on time (according to DSP detection
information event) in msec units.
The value must be a positive value. The default is -1.
Detects digit minimum on time (according to DSP detection
information event) in msec units. The digit time length must be
longer than this value to receive a detection. Any number may be
used, but the value must be less than
CasStateMachineDTMFMaxOnDetectionTime.
The value must be a positive value. The default is -1.
Defines the limitation for the maximum address digits that need to
be collected. After reaching this number of digits, the collection of
address digits is stopped.
The value must be an integer. The default is -1.
Defines the limitation for the maximum ANI digits that need to be
collected. After reaching this number of digits, the collection of
ANI digits is stopped.
The value must be an integer. The default is -1.
In some cases, when the state machine handles the ANI
collection (not related to MFCR2), you can enable the state
machine to collect ANI or discard ANI.

[0] No = Don't collect ANI.

[1] Yes = Collect ANI.

[-1] Default = Default value.
Defines which Signaling System to use in both directions
(detection\generation).

[0] DTMF = DTMF signaling.

[1] MF = (Default) MF signaling.

[-1] Default = Default value.
877
51. Configuration Parameters Reference
Description
Mediant 3000