Configuring Maximum Telnet/Ssh Sessions - AudioCodes Mediant 3000 User Manual
Gateway & enterprise sbc, family of media gateways & session border controllers
Hide thumbs
Also See for Mediant 3000:
- User manual (1070 pages) ,
- Installation manual (90 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
User's Manual
8.3
Configuring Maximum Telnet/SSH Sessions
You can set the maximum (up to five) number of concurrent Telnet/SSH sessions permitted
on the device.
Note:
sessions are currently active; otherwise, the new setting will not take effect.
To configure the maximum number of concurrent Telnet/SSH sessions:
1.
Open the Telnet/SSH Settings page (Configuration tab > System menu >
Management > Telnet/SSH Settings).
2.
In the 'Maximum Telnet Sessions' field, enter the maximum number of concurrent
sessions.
3.
Click Submit.
Version 6.8
Before changing this setting, make sure that not more than this number of
85
8. CLI-Based Management
Mediant 3000
Advertisement
Table of Contents
